Model SK1 is a wrap around matching satin finish stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models 1119, H1119.8 and H1119.8HO.
SK3 – Fountain SkirtModel SK3 is a wrap around satin finish stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models H1011.8 and H1011.8HO.
H7149MS – ShelfModel H7149MS wall mounting shelf is designed to support most remote chillers in order for chiller to be off the floor and tucked out of the way. Made of heavy gauge galvanized steel. Shelf size is 25 – 1/8″ x 13″ (63.8 x 33 cm).
Note: When installing chiller on shelf in a remote location, adequate air circulation and access must be provided for chiller.
HCR8.50 – Ferngesteuerte KühlanlageDie ferngesteuerte Kühlanlage vom Modell HCR8.50 mit 220 Volt und 50 Hz liefert pro Stunde 30,3 l an kaltem Wasser. Diese ferngesteuerte Kühlanlage kann gekühltes Wasser an eine Vielzahl von modernen Brunnenanlagen liefern. Die Kühlanlage kann unter einer Tischplatte, zwischen Wänden (lokale Vorschriften überprüfen) oben an einer Wand oder einer Säule verborgen werden. Perfekt für Fabrikhallen, Kantinen, Restaurants, Schulen und Büroräume geeignet. Weitere Einsatzmöglichkeiten sind: Vorkühlung von Trinkspendern und -brunnen, Kühlhaltung von Maschinenkühlmitteln, Foto- und Röntgenverarbeitung, Laborexperimente und Kapazitätsaufstockung für Eiswürfelbereiter. Die ferngesteuerte Kühlanlage vom Modell HCR8.50 (Fassungsvermögen 30,3 l) enthält einen Speicher aus schwerem verzinkten Stahl.
Das Kühlsystem ist ausbalanciert für einen niedrigeren Energieverbrauch und eine längere Lebensdauer dank einem Kompressor mit hoher Verdrängung, einem Gegenstrom-Kühlverdampfer/Kühler, einer effizient gewählten Größe der Kapillarverbindung, einem Trockner/Sieb mit großer Kapazität und einem luftgekühlten Kondensator mit maximalem Wärmetausch. Das umweltfreundliche Kühlmittel R134a wird durch eine kalibrierte Kapillarröhre geleitet. Mit Luft gekühlte ferngesteuerte Kühlanlagen müssen mit ausreichend Luft versorgt werden, um richtig zu funktionieren. Kühlanlagen, die unter eine Tischplatte montiert werden, müssen ausreichend belüftet werden.
Wenn die Kühlanlage in der Wand versenkt ist, müssen Sie sicherstellen, dass diese durch Ãffnen stets entfernbar ist, ohne die Anlage oder die Wand zu beschädigen. Mindestens 2,5 cm Abstand freihalten. Auf der Rückseite mindestens 10 cm Abstand freihalten. Die Einheit ist mit Kabeln im Anschlussgehäuse bestückt, 220 Volt, 50 Hz, Einphasenstrom. Das Fassungsvermögen beruht auf dem ARI-Standard für Betriebsbedingungen für 10 °C-warmes Trinkwasser, 26 °C-warmes Zulaufwasser und 32 °C Raumtemperatur.
Mehrfachausgänge: Das Modell HCR8.50 bietet maximal 2 Stationen (Trinksprudler, Glasfüller). Die Versorgungsleitung zur Station muss richtig isoliert sein und darf sich nicht weiter als 2,12 m vom Wasserkühler befinden.
Hinweis: Elektrische Wasserkühler sind nicht für Außenanwendungen oder Innenschwimmbäder (Chlor) ausgelegt und von solch einem Gebrauch wird abgeraten. Durch den Einsatz unter diesen Bedingungen erlischt möglicherweise der Garantieanspruch.
MTG.3500 – Mounting PlateMounting plate MTG.3500 with 6″ (15.2 cm) anchors provide an additional amount of anchoring support and is designed to assist in the installation of the heavy-duty series fountains. Specifically to be used in the pedestal models 3500, 3500FR, and 3500D. Set in place during the base concrete pour, this anchored mounting plate allows the fountain to be easily and quickly installed.
- Stainless steel construction with 6″ (15.2 cm) welded zinc anchors provides a solid support system for the pedestal fountain.
Anchors with bolts and washers, MTG.3501, provides an additional amount of support and is designed for use with the heavy-duty line of fountains. Specifically to be used with the 3500 series fountains. Set in place during the base concrete pour, this anchored mounting plate allows the heavy-duty series fountains to be easily and quickly installed.
- Galvanized 6″ (15.2 cm) steel anchors along with 5/8″ x 1-1/2″ (1.6 x 3.8 cm) stainless steel bolts and washers provide a solid support system for the pedestal fountains.
In-wall mounting frame, like the MTGFR.17, provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during rough-in phase of construction, this mounting frame allows the H1117.8 fountain to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for this dual bubbler fountain that is not only sturdy bu provides corrosion resistance as well.
- Wall opening size required is 31-1/8″ wide, 36-1/4″ high, and 12″ deep (79.1 x 92.1 x 30.5 cm).
In-wall mounting frame, like the MTGFR.7, provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during „rough-in“ phase of construction, this mounting frame allows the H1107.8 fountain to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for the single bubbler fountain that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 14″ wide, 25-13/16″ high, and 12″ deep (35.6 x 65.6 x 30.5 cm).
In-wall mounting frame, like the MTGFR.DF1, provides the maximum support and facilitates the installation of single bubbler ’swirl bowl‘ series fountains. Mounted during „rough-in“ phase of construction, this mounting frame allows the single bubbler fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these single bubbler fountains that is not only sturdy but provides corrosion resistance as well.
Model MTGFR.DF2 provides the maximum support and facilitates the installation of „Hi-Lo“, 1011MS and 1011HPSMS series fountains. Mounted during „rough-in“ phase of construction, this mounting frame allows the „Hi-Lo‘ fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides a certain amount of corrosion resistance as well.
Model MTGFR.LG provides the maximum support and facilitates the installation of „Hi-Lo“, electric drinking fountains. Mounted during „rough-in“ phase of construction, this mounting frame allows the „Hi-Lo“ fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for the dual bubbler fountains that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 31-1/8″ wide, 37-5/8″ high, and 12″ deep (79.1 x 95.6 x 30.5 cm).
Model MTGFR.SM provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during „rough-in“ phase of construction, this mounting frame allows for many single bubbler fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 14-1/8″ wide, 32-1/8″ high, and 12″ deep (35.9 x 81.6 x 30.5 cm).
