Portable emergency body shower 8140 – 9 liters capacity

The Haws® portable emergency body shower Model 8140 is the ideal solution when a plumbed-in safety shower is unavailable, such as on construction sites, during maintenance work, or for use in service vehicles. It includes water additive 9086, CO2 cartridge 9060 and a wall bracket. The Model 8140 is highly transportable and provides immediate first aid in cases of skin contamination with chemicals or burns. It must not be used for rinsing in cases of eye injuries.

 

Technical information

 

Features and Benefits Portable emergency body shower 8140

Wall mount eye wash 7260 AXION – ABS bowl

Model 7260 AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

TWBS.EW.H – Instantaneous Water Heater

Model TWBS.EW.H An on-demand, prepackaged, fully engineered and tested tempering system to provide tempered water instantaneously. System is designed to increase cold water temperature by a minimum of 19° C at 15.1 L flow and 38° C at 7.5 L; thus it is suitable for single eyewash application. Outlet water temperature is factory set at 26° C.

TWBS.EWE – Thermostatic Mixing Valve

Model TWBS.EWE, lead-free Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

TWBS.HF – Thermostatic Mixing Valve

Model TWBS.HF, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a pressure sensing diverter valve is provided that sends a pressure signal to open the cold water by-pass valve in the event of hot water pressure loss, main valve thermostat malfunction, or clogged cold water check-stop. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

TWBS.SHE – Thermostatic Mixing Valve

Model TWBS.SHE, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

H1001.8 – Barrier-Free Chilled Wall Mount Fountain

Model H1001.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

Model H1001.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1001.8HPS – Barrier-Free Chilled Wall Mount Fountain

Model H1001.8HPS electric water cooler provides 8 gph (30.3) chilled water performance in an engineered polished stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

Model H1001.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1011.8 – Barrier-Free Chilled Dual Wall Mount Fountain

Model H1011.8 barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

Model H1011.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1011.8HO – Barrier-Free Chilled Dual Wall Mount Fountain

Model H1011.8HO barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

Model H1011.8HO meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1011.8HPS – Barrier-Free Chilled Dual Wall Mount Fountain

Model H1011.8HPS (High Polished Stainless) “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

Model H1011.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1107.8 – Barrier-Free Chilled Wall Fountain

Model H1107.8 electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

Model H1107.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.