Often times it is beneficial to have a hose unit like the 8901B AXION to assist in the irrigation process. The drench head can be easily activated with integral squeeze lever, providing a maximum coverage area for the body with its soft flowing streams of water. Unit is conveniently mounted using wall clips keeping the emergency equipment held firmly against the wall.
- Dust cover allows for the spray head to stay protected from debris when not in use
- Requires minimal maintenance and is equipped with test card to record weekly testing
- 243.8 cm swivel hose provides an extended coverage area to further optimize the irrigation process
- In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212)
- Per ANSI, “Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them.”
- EN 15154 compliant
Model 8901RFK AXION body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2″ IPS.
In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI, “Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them.”
8904 AXION – Deck Mount EyewashHaws 8904 AXION deck mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.
- Dust cover allows for the 8904 AXION to stay protected from debris when not in use
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- 8 foot (243.8 cm) green hose provides an extended coverage area to further optimize the irrigation process
- In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8317 AXION – Emergency Shower and EyewashHaws 8317 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Solid galvanized steel construction makes for one sturdy piece of emergency equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8317CTFP AXION – Freeze-Protected Safety ShowerHaws Model 8317CTFP AXION heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 230V thermostat cable double wrapped piping, 1.9 cm insulation surrounding piping and outside jacket to prevent freezing, as well as a universal emergency sign.
- Perfect for extreme weather conditions dropping down to -34.4°C
- Universal design allows for top or bottom water supply
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
- Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)
8317CTFP AXION ATEX – Freeze-Protected Safety ShowerHaws Model 8317CTFP AXION ATEX heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 230V thermostat cable double wrapped piping, 1.9 cm insulation surrounding piping and outside jacket to prevent freezing, as well as a universal emergency sign.
- Perfect for extreme weather conditions dropping down to -34.4° C
- Universal design allows for top or bottom water supply.
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
- Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
- Rated ATEX Class IEC:EX IIC T6 Gb/ ATEX: EX II 2G. Tempering code T6
- EN 15154 compliant
Model 8317CTFP AXION ATEX is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified.
SP220W – Foot TreadleModel SP220W is a foot treadle assembly allows user to operate wall mounted eyewash without using hands. This treadle is specially designed for use with 7000 series wall mounted eyewash models. This model is adaptable to most existing models that operate with a push flag valve.
SP220 – Foot TreadleModel SP220 is a complete foot control assembly, including chain, clamp, nut, ring, screw, spring and treadle. For use on pedestal and combination units.
SP21FC – Eyewash HeadModel SP21FC is a ABS plastic eye/face wash head in Safety Green with a built-in 2.5 gpm (9.5 L) automatic pressure compensation flow control that assures multiple soft-and-steady streams of water for flowing water pressure ranging from 30 to 90 psi (2.1 to 6.2 bar). Integral flip-top dust cover is automatically released by flow of water. Flow control is easily accessible for cleaning. Supply 1/4″ IPS.
SP142 – Green Rubber HoseModel SP142 is a 6′, 250 psi working pressure rated green rubber hose.
SP185 – Striped LabelModel SP185 is a 21″ (53.3 cm) long, self-adhesive, high visibility stripe in Safety Green and bright yellow for high visibility.
SP178LG – Large Shower/Eyewash SignModel SP178LG is a vertical, large, universal combination emergency shower and eyewash sign, made of green plastic. 18″ W x 24″ H (45.7 x 61 cm).