Deck mounted sink units like the 4210 are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design helps to minimize excess splashing and self-rimming feature allows for easy mounting.
- Stainless steel construction offers a good amount of durability and corrosion resistance
- Beautiful satin finish resists stains and corrosion
- Sitting water-tight along with sound deadening underneath keep this unit mounted securely on any countertop
- Measurements are 25″ x 17″ x 5″ (63.5 x 43.2 x 12.7 cm)
- Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with requirements for drinking fountains
Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Specify one of the following gooseneck faucets to be installed left rear side:
Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,
Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet or,
Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.
Specify the following bubbler to be installed on right front side:
Model 5054LF lever handle polished chrome-plated brass drinking faucet,
Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or
Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.
4230 – Deck SinkDeck mounted sink units like the 4230 are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design helps to minimize excess splashing and self-rimming feature allows for easy mounting.
- Stainless steel construction offers a good amount of durability and corrosion resistance
- Beautiful satin finish resists stains and corrosion
- Sitting water-tight along with sound deadening underneath keep this unit mounted securely on any countertop
- Measurements are 31″ x 19″ x 5″ (78.7 x 48.2 x 12.7 cm)
- Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with requirements for drinking fountains
Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Specify one of the following gooseneck faucets to be installed left rear side:
Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet.
Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet or,
Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.
Specify the following bubbler to be installed on right front side:
Model 5054LF lever handle polished chrome-plated brass drinking faucet.
Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or
Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.
5010.6427SS – Drinking FaucetModel 5010.6427SS push button bubbler valve is designed with an adjustable stream regulation and a shielded bubbler to provide an anti-squirt drinking stream. Unit is self contained and is constructed from stainless steel with a polished finish, making this bubbler valve resistant to corrosive materials, and is easy to keep clean.
- Bubbler head includes: socket flange locked to bubbler inlet, washers, and locknut
- Dimensions: Flange diameter is 2-1/8″ (5.4 cm), shank is 7/8″ (2.2 cm) diameter x 1-1/8″ (3.2 cm) long, and connection is a 3/8″ IPS inlet
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5010SS push button bubbler valve is designed with an adjustable stream regulation and a shielded bubbler to provide an anti-squirt drinking stream. Constructed from stainless steel with a polished finish, this bubbler valve is resistant to corrosive materials and is easily kept clean.
- Dimensions: Bottom of base to top of bubbler is 3-3/8″ (8.6 cm), base diameter is 1-1/4″ (3.2 cm), and connection is a 3/8″ IPS inlet
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5017LF drinking faucet is designed with a shielded bubbler and self-closing push button with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy to keep clean.
- Drinking faucet includes: basin shank, locking pin, and mounting hardware
- Dimensions: 2″ (5.1 cm) high forged brass bubbler head with a 1/2″ O.D. (1.3 cm) slip-joint inlet.
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5051LF lever handle drinking faucet is designed with a shielded bubbler to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean. Unit comes further equipped with vandal resistant pins to prevent the unit from turning.
- Dimensions: Bottom of flange to top is 6-1/2″ (16.5 cm); flange diameter is 2″ (5.1 cm)
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5054LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with pressure regulating flow control to provide an anti-squirt drinking stream. Unit is to be mounted from a sink or counter top and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean.
- Drinking faucet includes: basin shank, locking pins, and valve mounting hardware
- Dimensions: 2″ (5.1 cm) high forged brass bubbler head with a 1/2″ O.D. (1.3 cm) slip-joint inlet.
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5060LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted vertically on 1/2″ IPS pipe and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean.
- Connection is 1/2″ IPS inlet
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
5452HST handle and stem assembly includes a PCP handle, cap, nylon lock nut, nylon and brass thrust washers, stainless steel wave washer, PCP lever handle with set screw, bearing set, bonnet cap, bonnet washer, gland packing, gland, spring, stem, seat washer, seat washer screw, renew seat and a seat o-ring. Used on models made in 2005 and newer.
5452LF – Sink FaucetModel 5452LF gooseneck faucet is designed with a .5 gpm (1.9 L) aerator and self-closing lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from lead-free polished chrome-plated brass, making this faucet resistant to corrosive materials and easy too keep clean.
- Dimensions: Center supply to center spout outlet is 4-1/2″ (11.4 cm), bottom of flange to extreme top of faucet is 10-3/8″ (26.3 cm), bottom of flange to spout outlet is 6-3/16″ (16 cm), flange diameter is 2″ (5.1 cm), shank diameter is 13/16″ (2.1 cm). Connection is a 1/2″ O.D. (1.3 cm) slip-joint inlet
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5510LF compression gooseneck faucet is designed with a .5 gpm (1.9 L) aerator and stay-open lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from lead-free polished chrome-plated brass, making this faucet resistant to corrosive materials and easy to keep clean.
- Gooseneck faucet incorporates: renewable seat, mounting pin to prevent base from turning, aerator with key, and integral basin shank
- Dimensions: Center supply to center spout outlet is 4-1/2″ (11.4 cm), bottom of flange to extreme top of faucet is 10-3/8″ (26.3 cm), bottom of flange to spout outlet is 6-3/16″ (16 cm), and flange diameter is 2″ (5.1 cm). Connection is a 1/2″ O.D. (1.3 cm) slip-joint inlet
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Model 5551 glassfiller faucet is designed with a self-closing lever handle valve to control the flow of the cold stream of water. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass. Making this bubbler valve resistant to corrosive materials and easy too keep clean.
Mounting hardware not included
- Dimensions: Bottom of flange to spout outlet is 8-1/8″ (20.6 cm); flange diameter is 1-1/4″ (3.2 cm); and c-supply to c-spouts 1-11/16″ (4 cm). Connection is a 3/8″ IPS inlet.
- Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9, .