Wall box 9206 for secure mounting and protection of the portable emergency body shower 8140.
- Dimensions (H x W x D): 700 x 330 x 263 mm
- Weight: 5.5 kg
Bacteriostatic preservative for use with the portable emergency body shower 8140. One 100ml bottle preserves up to 9 liters of water for up to 12 months.
- Shelf life: 3 years
- Storage temperature: between 5 and 40 °C
Screw-in replacement CO2 cartridge Model 9060 for portable emergency body shower 8140
- CO2 Capacity: 40g
- Intended Use: Exclusively for Portable Emergency Body Shower 8140
- Replacement Frequency: Recommended after each use or annually
The Haws 932X water hammer arrestor and piping kit series is designed for use with the Haws 9321, 9326 and 9327 Instantaneous Water Heaters. The kit is supplied with stainless steel piping, 1-1/4″ 316 stainless steel supply valve and Y strainer, lead-free bronze 1-1/4″ pressure regulating valve, and a lead-free brass water hammer arrestor. There are 10 kits available according to the size of arrestor needed, and whether the heater is ordered with or without support legs (refer to the sizing chart below).
Water Hammer Arrestor Sizing Chart |
|||
| Pipe Length (header to shower) | Arrestor Size | 9326/7 Unit with Legs Kit # | 9321/6/7 Unit without Legs Kit # |
| 15′ | B | 932X-12 | 932X-11 |
| 15′ — 30′ | C | 932X-22 | 932X-21 |
| 30′ — 50′ | D | 932X-32 | 932X-31 |
| 50′ — 70′ | E | 932X-42 | 932X-41 |
| 75′ — 90′ | F | 932X-52 | 932X-51 |
The Haws model 9084 is an immersible Cleansing Stick that gives continual protection against pathogenic bacteria for water storage systems. It balances the PH of the water preventing the build-up of bio-film, scale and corrosion for up to 3 years with proper usage. This non-chemical disinfecting module is designed to be immersed in a water tank to provide constant protection from bio-film and hazardous levels of pathogenic bacteria, including Legionella. The Cleansing Stick will treat up to 2000 liters. Dimensions: 81.3 cm long x 7.5 cm in diameter.
7603BL240H – 240V Insulated Blanket for Model 7603 (HazLoc)Model 7603BL240H NEMA 4 heated, insulated blanket provides ANSI compliant tempered potable water in operating temperatures down to -30° C. The self-contained blanket easily installs on to existing model 7603 units. Eyewash and heating blanket offered as a package or individually. 240VAC, 50/60Hz, 0.64A electrical requirement. Power cord not provided – power connection must be made according to code using Class I Division 2 compliant equipment. CSA certified for NEMA/Type 4 in Class 1, Division 2, Group B, C, D, T6, and Class 2, Division 2, Group F, G locations; and to ANSI/ISEA Z358.1
7603BL240 – 240V Insulated Blanket for Model 7603Model 7603BL240 NEMA 4, heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures down to -30° C. The self-contained blanket easily installs on to existing model 7603. Eyewash and heating blanket offered as a package or individually. 240VAC, 50/60 Hz, 0.64A electrical requirement. Power cord not provided – power connection must be made according to code using Class I Division 2 compliant equipment. Haz Loc options available. CSA certified for NEMA/Type 4 in ordinary locations, and to ANSI/ISEA Z358.1
9083 – HawsCLEANâ„¢ Portable Eyewash Cleansing StickThe model 9083 HawsCLEANâ„¢ cleansing stick is the safe and effective way to prevent the growth of Legionella, E-Coli and other harmful bacteria in most portable gravity fed or pressurized emergency eyewash equipment. Simple to install and maintain, the HawsCLEAN cleansing stick is non-chemical, non-powered, environmentally friendly and cost effective. Provides clean water and ANSI compliance in equipment up to 60 liters for up to three years when serviced just once annually. Simply immerse the stick in the tank and the process of protection starts immediately.
- Provides three years of protection against the growth of Legionella, E-Coli and other pathogenic bacteria
- Specifically designed for use in the portable emergency eyewash products up to 60 liters
- Lowest total cost of ownership: Single unit provides protection for 3 years
- Service just once annually, up to three times (three years), to achieve ANSI compliance
- Prevents Legionella, buildup of scale, biofilms and corrosion
- Easy to use and simple to install
- No power required
- Environmentally friendly: No chemicals, non-powered, low maintenance
HawsCLEANâ„¢ Copper-Silver Ionization Technology
Copper-Silver Ionization is recognized as a safe and effective method of cleansing water across many industries. Our Haws exclusive combination uses an advanced noble metal technology (active ceramics + copper-sliver ionization) to provide constant protection against the growth of pathogenic bacteria including legionella. This powerful disinfectant method keeps water safe and clean without the hassle and cost of frequently replacing chemicals.
SP157A – Scald Protect Bleed ValveModel SP157A is a scald protection bleed valve. Recommended for high ambient temperature locations where extreme heat or hot sun might cause internal water overheating. Flushes water through line when internal water temperature reaches 36.7° C and closes at 35° C. Full open temperature is 40.6° C. 1/2″ BSP inlet and outlet.
VRK7650 – Valve Repair KitModel VRK7650 is a valve repair kit for many of the Haws pull down eyewashes.
VRKEWSTR – Strainer Repair KitRepair kit for SP507 and SP509. Includes screen and gasket.
VRKMK81A – Valve Repair KitModel VRKM81A is a repair kit for Model MK81A special freeze-proof valve.
