Thermostatic Mixing Valve

Double click to view larger

Zoom Out
Zoom In

Thermostatic Mixing Valve

Model: EU-9201EW

Model 9201EW AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash, with a flow rate of 10 gpm (38.8 L).

View Product Details Add to My Project

Description

Thermostatic Mixing Valve

Model 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

  • A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
  • AXION's superior design and technology provide a complete safety solution for increased victim comfort.
  • Wax based thermostat technology for fast response time with proven highly reliable temperature control
  • Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
  • Modular brass design with supplied check valves
  • Over-sized valve seats resist failures caused by foreign matter
  • Efficient funnel design improves temperature control at low flow rates
  • Outlet temperature is factory set to 85® F (29® C).
  • Tempered water: High temperature limit is factory set to 90® F (32® C).

CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.

Features

  • System Certified
  • Thermostatic Protection
Resources

EU-9201EW Technical Downloads

EU-9201EW Sample Specifications

Model 9201EW (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to a single emergency eye/face wash fixture requiring flow up to 10 gpm (37.8 L). Unit employs a paraffin filled thermostatic mixing element. Cold Water Bypass flow rate of 3.8 gpm (14.4 L). The modular brass design with supplied check valves, over-sized valve seats, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85® F (29® C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90® F (16 - 32® C). Min/max inlet hot water temperature: 120®/180® F (49®/82® C), with recommended inlet temperature: 140® F (60® C). Min/max inlet cold water temperature: 40®/65® (4.4®/18.3® C). Inlets and outlet: 1/2" NPT(F).

Pricing Information

Contact Us for Pricing

Ask an Expert

Have product questions?

Have a question or concern about this product? If you don't find your answer, we're always here to help. Please use the form at the right and we'll get back to you within 48 business hours.