The Haws® 9327CE stainless steel Instantaneous Electric Water Heater is designed to provide immediate tepid water for safety showers and eyewashes. In accordance with EN 15154 guidelines, tepid water, ideally between 20°C and 25°C, ensures that victims can use the emergency equipment for the recommended 15 minutes without the risk of hypothermia or scalding.
Capable of delivering between 9.5 and 151 liters per minute of tepid water, the 9327CE can feed either a combination safety shower or multiple eyewash stations. When activated, the instantaneous heater quickly heats the water to the set tepid temperature in a matter of seconds. The predictive control algorithm ensures precise temperature control (+/- 1°C at steady state flow) of the tepid water.
The 9327CE stainless steel Instantaneous Electric Water Heater simplifies installation by integrating directly into the cold water supply pipe for the safety equipment, eliminating the need for a thermostatic mixing valve. It is a safe and smart solution, providing endless tepid water for emergency equipment across all industries, including offshore applications.
Technical information Instantaneous Electric Water Heater 9327CE
- Voltage: 400 V
- Rated power: 50/75/100 or 120 kW
- Flow rate: max. 151 liters per minute
- Optimum operation pressure: 4.1 – 6.2 bar
- Standard temperature setting: 29.4 °C
- Dimensions (H x W x D) : 762 x 667 x 342 mm
- Cold water inlet: 1 1/4” NPT(M)
- Tepid water outlet: 1 1/4” NPT(M)
Key Features
- The CE certification affirms the conformity of instantaneous water heater 9327CE with European health, safety and environmental protection standards
- Parabolic Heat DesignTM enables fast water heating and minimal pressure drop
- Predictive control algorithm and diverse safety features for precise temperature control
- Field programmable and updatable firmware provide flexibility for future adaptations
- Thermo-optical sensor for monitoring infrared elements ensures high operational reliability
- Thermo-optical sensor for protection against entrained air or improper commissioning
- Robust cabinet made of 304 or 316 stainless steel allows for indoor and outdoor installation (IP 66 / NEMA 4X)
- Wide range of factory-installed options available to meet on-site requirements
Benefits
- Increased employee safety: Allows employees to remain in the tepid water flush for the required 15 minutes without the risk of hypothermia or scalding
- Reduced energy consumption: The instantaneous water heater not only reduces energy consumption but also promotes sustainability. By consuming power only when actively heating water, it minimizes unnecessary energy usage, contributing to a greener and more eco-friendly approach
- Low energy and maintenance costs: The low energy and maintenance costs of this system contribute to a sustainable approach by eliminating the need for continuously heated water in stand-by systems. By efficiently using energy only when necessary, the system reduces overall energy consumption, resulting in lower carbon emissions and environmental impact
- Reduced legionella risk and improved hygiene: By eliminating standing tepid water in the system, the risk of Legionella growth is reduced, promoting a healthier environment with improved overall hygiene
- Space-efficient design: Compared to alternative solutions, the instantaneous heater has a small footprint as it eliminates the need for boilers, pumps, and tepid water loops
- Flexible installation: Can be mounted on a wall above or near the emergency equipment to free up floor space
- Easy integration: Only requires a power cable, making it simple to integrate into existing solutions
- Reliable and safe operation: Maintains the defined water temperature (+/- 1°C at steady state flow) without the need for additional tanks, valves, pumps, or other features
- Compliance with standards: The instantaneous water heater complies with the CE standard and is suitable for use with eye wash stations and emergency showers according to EN 15154 or ANSI.Z358
- Retrofitting and new system suitability: The 9327CE instantaneous heater can be used for both retrofitting existing installations and implementing new systems
The Haws® all stainless steel combination emergency shower 8330 AXION consists of an emergency body shower with stainless steel head and an eyewash station with stainless steel bowl. It complies to the standards EN 15154-1, EN 15154-2 and ANSI Z358.1 and is the optimal solution for industrial applications where highest corrosion resistance is required. All components are made of stainless steel and makes this freestanding combination shower extremely corrosion resistant and very rugged.
The combination emergency shower 8330 AXION comprises an AXION® overhead drench shower and an AXION face+eyewash. The eyewash is activated by a push plate and delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The AXION nozzle of the drench shower is activated by a pull-down handle and delivers a soft and homogenous flow across the entire footprint. The unique AXION system eliminates the main issues of other emergency shower and eyewash systems to provide proper first aid.
Technical information
- Water flow body shower: 76 liters/minute
- Water flow face+eye wash: 14 liters/minute
- Dimensions (H x W x D): 2410 x 351 x 872 mm
- Water inlet: G 1 1/4”
- Water outlet: G 1 1/4″
Characteristics Emergency Shower 8330 AXION
- Pre-built and water/pressure tested
- Highest corrosion resistance as all components are made of type 304 stainless steel.
- Increased safety due to AXION face+eyewash head, AXION shower nozzle and integral flow control
- Corrosion resistant 28 cm stainless steel bowl
- Corrosion resistant 28 cm stainless steel shower head
- Corrosion resistant stainless steel ball valves equipped with stainless steel ball and stem
- Corrosion resistant stainless steel in-line mesh strainer to prevent debris from reaching the eyewash.
- 1-1/4″ stainless steel pipe and fittings
- Cast finished stainless steel 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
The Haws 8336 AXION combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Emergency combination unit is equipped with Type 316 Stainless Steel ball valves and constructed of green epoxy finished, Schedule 80 PVC pipe and fittings which are resistant to corrosion
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
7778B AXION – Wall mount eye wash – all stainless steelThe Haws® eye wash model 7778B AXION is the optimal solution for industrial applications where highest corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. All components are made of stainless steel and makes this permanently installed eye wash extremely corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7778B AXION also includes a stainless steel wall bracket, yellow plastic pop-off dust cover for eye wash head and eye wash safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 381 x 470 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye wash 7778B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable stainless steel type 304 ball valve equipped with stainless steel ball and stem
- Stainless steel type 304 in-line mesh strainer to prevent debris
- Robust stainless steel type 304 wall bracket
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Model 8130 AXION AXION MSR drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reduced installation time due to pre-built valve assembly and units design to mount horizontally or vertically from any wall or ceiling
- Corrosion resistant Schedule 80 PVC pipe and stainless steel valve makes for a durable long lasting product
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8133H AXION – AXION® MSR Corrosion Resistant Emergency Drench ShowerModel 8133H AXION, horizontal overhead safety shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this horizontally designed drench shower is designed for safety.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reduced installation time due to pre-built valve assembly and unit’s ability to be mounted horizontally from any wall
- Solid construction from Type 304 Stainless Steel makes for a durable long lasting product
- Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
Model 7777 AXION all stainless steel pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit also is equipped with an in-line 50 x 50 mesh water strainer and stainless steel dust cover so when debris is present, the irrigation process stays protected. Solid mounted pedestal design allows the 7777 AXION to be placed securely in multiple locations.
- A great addition to unsafe environments where the eyes and face may be exposed to corrosive materials
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Corrosion resistant construction from Type 304 Stainless Steel make for one corrosive resistant piece of equipment
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment