The Haws® 9321CE compact indoor Instantaneous Electric Water Heater is designed to provide immediate tepid water for safety showers and eyewashes. In accordance with EN 15154 guidelines, tepid water, ideally between 20°C and 25°C, ensures that victims can use the emergency equipment for the recommended 15 minutes without the risk of hypothermia or scalding.
Capable of delivering between 9.5 and 114 liters per minute of tepid water, the 9321CE can feed either a combination safety shower or multiple eyewash stations. When activated, the instantaneous heater quickly heats the water to the set tepid temperature in a matter of seconds. The predictive control algorithm ensures precise temperature control (+/- 1°C at steady state flow) of the tepid water.
The 9321CE compact indoor Instantaneous Water Heater simplifies installation by integrating directly into the cold water supply pipe for the safety equipment, eliminating the need for a thermostatic mixing valve. It is a safe and smart solution, providing endless tepid water for indoor-installed emergency equipment across the industries.
Technical information Instantaneous electric water heater 9321CE
- Voltage: 400 V
- Rated power: 50/75/100 or 120 kW
- Flow rate: max. 114 liters per minute
- Optimum operation pressure: 4.1 – 6.2 bar
- Standard temperature setting: 29.4 °C
- Dimensions (H x W x D) : 665 x 432 x 261 mm
- Cold water inlet: 1 1/4” NPT(M)
- Tepid water outlet: 1 1/4” NPT(M)
Key Features
- The CE certification affirms the conformity of instantaneous water heater 9321CE with European health, safety and environmental protection standards
- Parabolic Heat DesignTM enables fast water heating and minimal pressure drop
- Predictive control algorithm and diverse safety features for precise temperature control
- Field programmable and updatable firmware provide flexibility for future adaptations
- Thermo-optical sensor for monitoring infrared elements ensures high operational reliability
- Thermo-optical sensor for protection against entrained air or improper commissioning
- Powder-coated cabinet made of cold rolled steel allows for indoor installation
- Ideal choice for space-conscious indoor installations due to compact design and wall-mounting feature
Benefits
- Increased employee safety: Allows employees to remain in the tepid water flush for the required 15 minutes without the risk of hypothermia or scalding
- Reduced energy consumption: The instantaneous water heater not only reduces energy consumption but also promotes sustainability. By consuming power only when actively heating water, it minimizes unnecessary energy usage, contributing to a greener and more eco-friendly approach
- Low energy and maintenance costs: The low energy and maintenance costs of this system contribute to a sustainable approach by eliminating the need for continuously heated water in stand-by systems. By efficiently using energy only when necessary, the system reduces overall energy consumption, resulting in lower carbon emissions and environmental impact
- Reduced legionella risk and improved hygiene: By eliminating standing tepid water in the system, the risk of Legionella growth is reduced, promoting a healthier environment with improved overall hygiene
- Space-efficient design: Compared to alternative solutions, the instantaneous heater has a small footprint as it eliminates the need for boilers, pumps, and tepid water loops
- Flexible installation: Can be mounted on a wall above or near the emergency equipment to free up floor space
- Easy integration: Only requires a power cable, making it simple to integrate into existing solutions
- Reliable and safe operation: Maintains the defined water temperature (+/- 1°C at steady state flow) without the need for additional tanks, valves, pumps, or other features
- Compliance with standards: The instantaneous water heater complies with the CE standard and is suitable for use with eye wash stations and emergency showers according to EN 15154 or ANSI.Z358
- Retrofitting and new system suitability: The 9321CE compact indoor Instantaneous electric water heater can be used for both retrofitting existing installations and implementing new systems
Model 7260 AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Unit features a round 11″ (27.9 cm) green ABS plastic receptor and aluminum
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
H1011.8HO – Barrier-Free Chilled Dual Wall Mount FountainModel H1011.8HO barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge type 304 stainless steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- “Hands off” feature allows the lower fountain to be activated without the use of the operator’s hands, better protecting it from germs and assisting in the ease of use to the handicap
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model H1011.8HO meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1001.8 – Barrier-Free Chilled Wall Mount FountainModel H1001.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model H1001.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1001.8HPS – Barrier-Free Chilled Wall Mount FountainModel H1001.8HPS electric water cooler provides 8 gph (30.3) chilled water performance in an engineered polished stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful polished finish resists stains and corrosion
Model H1001.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8 – Barrier-Free Chilled Dual Wall Mount FountainModel H1011.8 barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model H1011.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8HPS – Barrier-Free Chilled Dual Wall Mount FountainModel H1011.8HPS (High Polished Stainless) “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful polished finish resists stains and corrosion
Model H1011.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1107.8 – Barrier-Free Chilled Wall FountainModel H1107.8 electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 100% Lead free waterways
- 14 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
Model H1107.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1109.8 – Barrier-Free Chilled Wall Mount FountainModel H1109.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease.
- Beautiful satin finish resists stains and corrosion
Model H1109.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1117.8 – Barrier-free Chilled Dual Wall Mount FountainModel H1117.8 “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% Lead free waterways. 14 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1117.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1119.8 – Barrier-Free Chilled Dual Wall Mount FountainModel H1119.8 “Hi-Lo” barrier-free electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1119.8 meets all current Federal Hawsmanufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
8327 AXION – AXION® MSR Emergency Shower and Eye/Face Wash with grateModel 8327 AXION combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal shower heads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Also features a stainless steel grate for shower and eye was activation, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability
- Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ NPT
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant