Indoor Archives - EMEA English

7260 AXION – AXION® MSR Wall Mount Eye/Face Wash

Model 7260 AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Unit features a round 11″ (27.9 cm) green ABS plastic receptor and aluminum
Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
ANSI Z358.1 tempering solutions
EN 15154 compliant

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

TWBS.EW.H – Instantaneous Water Heater

Model TWBS.EW.H An on-demand, prepackaged, fully engineered and tested tempering system to provide tempered water instantaneously. System is designed to increase cold water temperature by a minimum of 19° C at 15.1 L flow and 38° C at 7.5 L; thus it is suitable for single eyewash application. Outlet water temperature is factory set at 26° C.

It is ideal for areas where supply water temperatures fall below 15° C while hot water is not present
System consists of an 20 KW electrical instantaneous water heater, a hot shutoff valve, a bypass valve, an in-line 50 x 50 mesh filter, and an outlet temperature gauge
Requires 3 – 6 ATM flowing pressure
Inlet and Outlet: 1/2″ IPS.
Electrical Supply: 480 VAC, 3-phase, 3 wire and ground. 24 amp per phase (optional 208/240 3-phase available – ask for quote).
UL listed for indoor use only.

TWBS.EWE – Thermostatic Mixing Valve

Model TWBS.EWE, lead-free Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
Wax based thermostat technology for fast response time with proven highly reliable temperature control
Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
Modular lead-free brass design with internal check stops
Over-sized valve seats resist failures caused by foreign matter
A new and efficient shuttle design eliminates valve binding
A custom funnel design improves temperature control at low flow rates
Outlet temperature is factory set to 85® F (29® C)
Tempered water: High temperature limit is factory set to 87® F (30® C)
Cold water by-pass valves are closed during normal operation, regardless of flow rate

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

TWBS.HF – Thermostatic Mixing Valve

Model TWBS.HF, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a pressure sensing diverter valve is provided that sends a pressure signal to open the cold water by-pass valve in the event of hot water pressure loss, main valve thermostat malfunction, or clogged cold water check-stop. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range
AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
Wax based thermostat technology for fast response time with proven highly reliable temperature control
Highest Cold Water Bypass flow rate in the industry (100% of rated tepid flow rate)
Modular lead-free brass design with internal check stops
Over-sized valve seats resist failures caused by foreign matter
A new and efficient shuttle design eliminates valve sticking
A custom funnel design improves temperature control at low flow rates
Outlet temperature is factory set to 85® F (29® C)
Tempered water: High temperature limit is factory set to 87® F (30® C)
Cold water by-pass valves are closed during normal operation, regardless of flow rate

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

TWBS.SHE – Thermostatic Mixing Valve

Model TWBS.SHE, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

A flow rate of 1 to 74 gpm (280 L) for better temperature control across the operating range
AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
Wax based thermostat technology for fast response time with proven highly reliable temperature control
Highest Cold Water Bypass flow rate in the industry (68% of rated tepid flow rate)
Modular lead-free brass design with internal check stops
Over-sized valve seats resist failures caused by foreign matter
A new and efficient shuttle design eliminates valve binding
A custom funnel design improves temperature control at low flow rates
Outlet temperature is factory set to 85® F (29® C)
Tempered water: High temperature limit is factory set to 87® F (30® C)
Cold water by-pass valves are closed during normal operation, regardless of flow rate

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

H1011.8HPS – Barrier-Free Chilled Dual Wall Mount Fountain

Model H1011.8HPS (High Polished Stainless) “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
100% lead-free waterways
Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
Laminar flow prevents splashing, keeping the drinking area contained and clean
Maintenance is made easy with front access to valve adjustment and cartridge replacement
Beautiful polished finish resists stains and corrosion

Model H1011.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.