The Haws 7603T240H is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 56.8 liter portable hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -30° C and 38° C for locations without access to a continuous potable water source.
- Features a 56.8 liter stainless steel tank
- Upgraded ball valves with stainless steel ball and stem
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Measurements: 100.3 cm high, 40.6 cm diameter
- 240VAC, 50/60Hz, 0.64A electrical requirement
- Power cord not provided – power connection must be made according to code using Class I Division 2 compliant equipment
- CSA certified for NEMA/Type 4 in Class 1, Division 2, Group B, C, D, T6, and Class 2, Division 2, Group F, G locations; and to ANSI/ISEA Z358.1
The Haws 7603T240 is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -30° C and 38° C for locations without access to a continuous portable water source.
- Features a 56.8 liter stainless steel tank
- Upgraded ball valves with stainless steel ball and stem
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Measurements: 100.3 cm high, 40.6 cm diameter
- 240VAC, 50/60Hz, 0.64A electrical requirement
- CSA certified for NEMA/Type 4 in ordinary locations, and to ANSI/ISEA Z358.1
Model TWBS.EW.H An on-demand, prepackaged, fully engineered and tested tempering system to provide tempered water instantaneously. System is designed to increase cold water temperature by a minimum of 19° C at 15.1 L flow and 38° C at 7.5 L; thus it is suitable for single eyewash application. Outlet water temperature is factory set at 26° C.
- It is ideal for areas where supply water temperatures fall below 15° C while hot water is not present
- System consists of an 20 KW electrical instantaneous water heater, a hot shutoff valve, a bypass valve, an in-line 50 x 50 mesh filter, and an outlet temperature gauge
- Requires 3 – 6 ATM flowing pressure
- Inlet and Outlet: 1/2″ IPS.
- Electrical Supply: 480 VAC, 3-phase, 3 wire and ground. 24 amp per phase (optional 208/240 3-phase available – ask for quote).
- UL listed for indoor use only.
Model H1107.8 electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 100% Lead free waterways
- 14 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
Model H1107.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1109.8 – Barrier-Free Chilled Wall Mount FountainModel H1109.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease.
- Beautiful satin finish resists stains and corrosion
Model H1109.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1117.8 – Barrier-free Chilled Dual Wall Mount FountainModel H1117.8 “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% Lead free waterways. 14 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1117.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1119.8 – Barrier-Free Chilled Dual Wall Mount FountainModel H1119.8 “Hi-Lo” barrier-free electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1119.8 meets all current Federal Hawsmanufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1001.8 – Barrier-Free Chilled Wall Mount FountainModel H1001.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model H1001.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1001.8HPS – Barrier-Free Chilled Wall Mount FountainModel H1001.8HPS electric water cooler provides 8 gph (30.3) chilled water performance in an engineered polished stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful polished finish resists stains and corrosion
Model H1001.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8 – Barrier-Free Chilled Dual Wall Mount FountainModel H1011.8 barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model H1011.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8HO – Barrier-Free Chilled Dual Wall Mount FountainModel H1011.8HO barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge type 304 stainless steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- “Hands off” feature allows the lower fountain to be activated without the use of the operator’s hands, better protecting it from germs and assisting in the ease of use to the handicap
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model H1011.8HO meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8HPS – Barrier-Free Chilled Dual Wall Mount FountainModel H1011.8HPS (High Polished Stainless) “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful polished finish resists stains and corrosion
Model H1011.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.