Model 6275 compression hose bib faucet is designed to activate through a turn knob on the top of the unit.

• Connection is 3/4″ male hose thread x 1/2″ IPS inlet.

Model SP509 is a fully serviceable in-line, 50 x 50 mesh strainer filters debris from reaching the eye or eye/face wash.

Model SP260.158 chrome-plated brass stay-open ball valve, equipped with a stainless steel stem. Full flow occurs with pull on lever. Special self-draining feature allows valve and connecting lines to showerhead to drain to prevent freezing. Full flow occurs with pull on lever. 1″ IPS.

Model EU-SP260 is a chrome-plated, stay-open, brass ball shower valve with stainless steel stem for horizontal or vertical installation. Model includes handle. 1″ FIPS.

Model SP238 is a stainless steel push flag that operates a stay-open chrome-plated brass ball valve, and is for vertical operation. The model is equipped with a stainless steel ball and stem. 1/2″ FIPS inlet x 1/2″ FIPS outlet.

Model SP229.158 chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Special self-draining feature allows valve and connecting lines to eyewash to drain to prevent freezing. Full flow occurs with push on stainless steel flag. 1/2″ IPS inlet and outlet.

Model SP229 is a stainless steel push flag that operates a stay-open chrome-plated brass ball eyewash valve. The model is equipped with stainless steel ball and stem. Includes 1/2″ FIPS inlet x 1/2″ FIPS outlet.

Model SP227 chrome-plated brass stay-open ball valve, equipped with a stainless ball and stem. Designed for vertical installation. Full flow occurs with push on stainless steel flag. 1/2″ IPS inlet x 3/8″ IPS outlet.

Model SP226PCP is a polished chrome-plated ball valve with flag, 1/2″ FIPS inlet by 3/8″ FIPS outlet. For vertical installation.

Model SP225LF is a stay-open chrome-plated brass ball eyewash valve that is equipped with stainless steel ball and stem, without flag. Includes 1/2″ FIPS inlet x 1/4″ FIPS outlet.

Model SP225 is a stainless steel push flag that operates a stay-open chrome-plated brass ball eyewash valve. The model is equipped with stainless steel ball and stem. Includes 1/2″ FIPS inlet x 1/4″ FIPS outlet.

Lab units like the 7610 AXION barrier-free wall or deck mount pull down eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

• Unit can be deck or wall mounted with easy change-over instructions
• Extended-length pull down arms are designed to accommodate wheelchair access
• Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Dust cover allows for the 7610 AXION to stay protected from debris when not in use
• Activation and deactivation occur at a 30 degree angle from horizontal limiting splash of water onto counter or wall
• Rear mount design allows the sink to remain open to other uses
• ANSI/ISEA Z358.1 tempering solutions
• EN 15154 compliant

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome