Haws 8905 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.
- Dust cover allows for the 8905 AXION to stay protected from debris when not in use
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- 12 foot (365.8 cm) yellow recoil hose provides an extended coverage area to further optimize the irrigation process
- In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
9400 – AXION® Steam Water HeaterThe Haws 9400 AXION® Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. An ASSE 1071 certified mixing valve blends hot and cold water to produce an output of 80° F (27° C ) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure.
9400LPS – AXION® Low Pressure Steam Water HeaterThe Haws 9400LPS AXION® Low Pressure Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. An ASSE 1071 certified mixing valve blends hot and cold water to produce an output of 80® F (27® C ) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure.
9009 – Waste ContainerModel 9009 waste water container adapts to model 9008 to be used with models 7500 or 9010. Twenty gallon (75.7 L) yellow container constructed of tough polymer resin..
8780 – Indoor Emergency Water Tempering SkidPERFORMANCE SERIES: Model 8780 standard skid-mounted tempering system which may supply a number of drench systems or eyewash stations. This unit is supplied with a 5′ x 5′ (1.52 x 1.52 m) membrane encapsulated, fiberglass channel reinforced wooden structure with bright yellow elastomeric chemically resistant waterproof coating, and protected with UV inhibitors provides an operating temperature range of 40® to 100® F (4® to 38® C). This single or multiple shower and/or eyewash feeder is designed to operate with a number of tempering and electrical options. The TWBS.HF tempered water blending system includes an integral hot water supply, whether stored or supplied by steam, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. System piping includes Schedule 40 galvanized piping with brass and stainless steel valves.
Specify tempering booth models as follows: a model number, tempering system option, electrical system option. Standard electrical system is equipped with 480V 3ph, and is easily adapted for other voltages upon request. Example: Model 8780.22.32 is a Model 8780 Tempering Booth equipped with 119 gallon (450 L) ASME tank, and a Class 1, Division 2, Group B, C, D, T2D electrical system. For a complete list of options, refer to the specification sheet.
Visit the Haws Integratedâ„¢ website for more information
