MTGFR.SM – Mounting Frame

Model MTGFR.SM provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during “rough-in” phase of construction, this mounting frame allows for many single bubbler fountains to be easily and quickly installed.

MTGFR.LG – Mounting Frame

Model MTGFR.LG provides the maximum support and facilitates the installation of “Hi-Lo”, electric drinking fountains. Mounted during “rough-in” phase of construction, this mounting frame allows the “Hi-Lo” fountains to be easily and quickly installed.

BP3 – Back Panel

Model BP3 is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. Model BP3 is 15″ x 9″ (38 x 23 cm) stainless steel with a satin finish. Used on 1105 and 1109 series models.

BP6 – Back Panel

Model BP6 is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. Model BP6 is 15″ x 9″ (38 x 23 cm) stainless steel with a satin finish.

BP7 – Back Panel

Model BP7 is a versatile and decorative back panel for Model 1107L that increases location visibility of the fountain and also helps protect wall from inadvertent splash. It is a 15″ x 9″ (38 x 23 cm) satin stainless steel panel.

H1001.8 – Barrier-Free Chilled Wall Mount Fountain

Model H1001.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

Model H1001.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1011.8 – Barrier-Free Chilled Dual Wall Mount Fountain

Model H1011.8 barrier-free “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

Model H1011.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1109.8 – Barrier-Free Chilled Wall Mount Fountain

Model H1109.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

Model H1109.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

H1119.8 – Barrier-Free Chilled Dual Wall Mount Fountain

Model H1119.8 “Hi-Lo” barrier-free electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

Model H1119.8 meets all current Federal Hawsmanufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

HCR8.50 – Remote Chiller

Model HCR8.50 is a 220 Volt, 50 Hz remote chiller provides 8.0 gallons (30.3 L) per hour of cold water. This remote can provide chilled water to a water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools, and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model HCR8.50, 8-gph remote chiller, includes a heavy gauge galvanized steel cabinet.

The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer, and a fan-cooled condenser with maximum heat exchange. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Air cooled remote chillers require air circulation for proper operation. Any chiller mounted under a counter must also be provided with adequate ventilation.

When chiller is installed in wall be certain that it can always be removed through opening without damaging either chiller or wall. Allow minimum 1″ clearance. Minimum 4″ clearance on back side. Unit is furnished with leads enclosed inside terminal enclosure 220 Volt, 50 Hz, single phase. Capacity is based on ARI standard of rating conditions of 50® F (10® C) drinking water, 80® F (26® C) inlet water, and 90® F (32® C) room temperature.

Multiple-Outlets: HCR8.50 is capable of supplying a maximum of 2 stations (bubbler, glassfiller). Supply line to station should be adequately insulated and no farther than 7 feet (2.12 m) from chiller.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

6700.4 – Mounting Plate

In-wall universal mounting plate, like the 6700.4, provides the maximum support and facilitates for the installation of “Hi-Lo”, wall mounted fountains. Mounted prior to the finished wall, this mounting plate allows the “Hi-Lo” fountains to be easily and quickly installed.

6700 – Mounting Plate

In-wall universal mounting plate, like the 6700, provides the maximum support and facilitates for the installation of single bubbler wall mounted fountains. Mounted prior to the finished wall, this mounting plate allows the fountain to be easily and quickly installed.