Model H1011.8HPS (High Polished Stainless) “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. It uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 18 gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14 gauge Type 304 high-polished stainless steel wall bracket
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful polished finish resists stains and corrosion
Model H1011.8HPS meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1107.8 – Barrier-Free Chilled Wall FountainModel H1107.8 electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 100% Lead free waterways
- 14 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
Model H1107.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1109.8 – Barrier-Free Chilled Wall Mount FountainModel H1109.8 barrier-free electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease.
- Beautiful satin finish resists stains and corrosion
Model H1109.8 meets all current Federal Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1117.8 – Barrier-free Chilled Dual Wall Mount FountainModel H1117.8 “Hi-Lo” electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% Lead free waterways. 14 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1117.8 meets all current Federal and Child ADA. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1119.8 – Barrier-Free Chilled Dual Wall Mount FountainModel H1119.8 “Hi-Lo” barrier-free electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1119.8 meets all current Federal Hawsmanufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
HCR8.50 – Remote ChillerModel HCR8.50 is a 220 Volt, 50 Hz remote chiller provides 8.0 gallons (30.3 L) per hour of cold water. This remote can provide chilled water to a water to a wide variety of fountains with modern styling. Chiller can be concealed under a counter, between or within walls (check local codes), or high on a wall or column. Ideally suited for factories, cafeterias, restaurants, schools, and offices. Other uses could be for precooling for beverage dispensers and fountains, machine coolant cooling, photo and X-ray processing, laboratory experimental work, or a capacity booster for ice cube makers. Model HCR8.50, 8-gph remote chiller, includes a heavy gauge galvanized steel cabinet.
The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer, and a fan-cooled condenser with maximum heat exchange. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Air cooled remote chillers require air circulation for proper operation. Any chiller mounted under a counter must also be provided with adequate ventilation.
When chiller is installed in wall be certain that it can always be removed through opening without damaging either chiller or wall. Allow minimum 1″ clearance. Minimum 4″ clearance on back side. Unit is furnished with leads enclosed inside terminal enclosure 220 Volt, 50 Hz, single phase. Capacity is based on ARI standard of rating conditions of 50® F (10® C) drinking water, 80® F (26® C) inlet water, and 90® F (32® C) room temperature.
Multiple-Outlets: HCR8.50 is capable of supplying a maximum of 2 stations (bubbler, glassfiller). Supply line to station should be adequately insulated and no farther than 7 feet (2.12 m) from chiller.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
9200REC – Recessed CabinetModel 9200REC recessed cabinet is manufactured of 18 gauge Type 304 Stainless Steel, locking door which is supplied with a heavy duty stainless steel piano hinge, and removable upper and lower panels to accommodate any of the Haws Thermostatic Mixing Valves.
(Specific panel kits are offered to match specific Valve – please look under options for valve to be ordered for correct kit)
9200SUR – Surface Mount CabinetModel 9200SUR surface mounted cabinet is manufactured of 18 gauge Type 304 Stainless Steel, locking door which is supplied with a heavy duty stainless steel piano hinge, and removable upper and lower panels to accommodate any of the Haws Thermostatic Mixing Valves.
(Specific panel kits are offered to match specific Valve – please look under options for valve to be ordered for correct kit)
Thermostatic Mixing Valve – 117 liters/minThe Haws® thermostatic mixing valve model 9201E mixes hot and cold water and provides a safe tepid water supply for emergency showers and eyewash stations. Flow range of 4 to 117 liters/minute provides service for one emergency combination shower or multiple eyewashes, reducing complexity and hardware costs.
Technical information thermostatic mixing valve model 9201E
- Outlet temperature factory setting: 26°C.
- Maximum operating pressure: 8.62 bar.
- Temperature adjustment range: 16 – 35° C.
- Maximum inlet temperature: 82° C.
- Recommended inlet temperature: 60° C.
- Minimum inlet temperature: 49° C
- Water inlets: BSP 1-1/4″
- Water outlet: BSP 1-1/4″
Characteristics
- Best-in-class cold water bypass flow (65% of rated tempered water flow) means continued protection under adverse conditions.
- Actively suspends hot water flow when cold water supply is lost to protect against scalding.
- Lowest internal pressure drop for this valve class – essential where supply pressure is low.
- Paraffin-based thermal actuation technology keeps outlet temperature within tight specifications to prevent scalding and hypothermia.
- Superior shuttle design combined with premium material selection eliminates valve binding and reduces maintenance costs.
- Innovative funnel design generates turbulent flow to ensure consistent temperature blending across entire flow range.
- Lime and calcium resistant materials used throughout prevent valve sticking and provide a long service life.
Model 9201EFE Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)
- A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
- Cold water by-pass valves are closed during normal operation, regardless of flow rate.
CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.
9201EW – Thermostatic Mixing ValveModel 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)
- A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
- Modular brass design with supplied check valves
- Over-sized valve seats resist failures caused by foreign matter
- Efficient funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.
9201H – Thermostatic Mixing ValveModel 9201H, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet downstream for the most accurate measurement.)
- A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
- Modular lead-free brass design with internal check stops
- Oversized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C)
- Tempered water: High temperature limit is factory set to 87® F (30® C)
- Cold water by-pass valves are closed during normal operation, regardless of flow rate
Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).