Model 9201H, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet downstream for the most accurate measurement.)

• A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
• Modular lead-free brass design with internal check stops
• Oversized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85® F (29® C)
• Tempered water: High temperature limit is factory set to 87® F (30® C)
• Cold water by-pass valves are closed during normal operation, regardless of flow rate

Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

Model 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
• Modular brass design with supplied check valves
• Over-sized valve seats resist failures caused by foreign matter
• Efficient funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85® F (29® C).
• Tempered water: High temperature limit is factory set to 90® F (32® C).

CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.

Model 9201EFE Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
• Modular brass design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85® F (29® C).
• Tempered water: High temperature limit is factory set to 90® F (32® C).
• Cold water by-pass valves are closed during normal operation, regardless of flow rate.

CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.

The Haws® thermostatic mixing valve model 9201E mixes hot and cold water and provides a safe tepid water supply for emergency showers and eyewash stations. Flow range of 4 to 117 liters/minute provides service for one emergency combination shower or multiple eyewashes, reducing complexity and hardware costs.

Technical information thermostatic mixing valve model 9201E

• Outlet temperature factory setting: 26°C.
• Maximum operating pressure: 8.62 bar.
• Temperature adjustment range: 16 – 35° C.
• Maximum inlet temperature: 82° C.
• Recommended inlet temperature: 60° C.
• Minimum inlet temperature: 49° C
• Water inlets: BSP 1-1/4″
• Water outlet: BSP 1-1/4″

Characteristics

• Best-in-class cold water bypass flow (65% of rated tempered water flow) means continued protection under adverse conditions.
• Actively suspends hot water flow when cold water supply is lost to protect against scalding.
• Lowest internal pressure drop for this valve class – essential where supply pressure is low.
• Paraffin-based thermal actuation technology keeps outlet temperature within tight specifications to prevent scalding and hypothermia.
• Superior shuttle design combined with premium material selection eliminates valve binding and reduces maintenance costs.
• Innovative funnel design generates turbulent flow to ensure consistent temperature blending across entire flow range.
• Lime and calcium resistant materials used throughout prevent valve sticking and provide a long service life.

Model 9200SUR surface mounted cabinet is manufactured of 18 gauge Type 304 Stainless Steel, locking door which is supplied with a heavy duty stainless steel piano hinge, and removable upper and lower panels to accommodate any of the Haws Thermostatic Mixing Valves.

(Specific panel kits are offered to match specific Valve – please look under options for valve to be ordered for correct kit)

Model 9200REC recessed cabinet is manufactured of 18 gauge Type 304 Stainless Steel, locking door which is supplied with a heavy duty stainless steel piano hinge, and removable upper and lower panels to accommodate any of the Haws Thermostatic Mixing Valves.

(Specific panel kits are offered to match specific Valve – please look under options for valve to be ordered for correct kit)

Haws 8905 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.

• Dust cover allows for the 8905 AXION to stay protected from debris when not in use
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• 12 foot (365.8 cm) yellow recoil hose provides an extended coverage area to further optimize the irrigation process
• In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Often times it is beneficial to have a hose unit like the 8901B AXION to assist in the irrigation process. The drench head can be easily activated with integral squeeze lever, providing a maximum coverage area for the body with its soft flowing streams of water. Unit is conveniently mounted using wall clips keeping the emergency equipment held firmly against the wall.

• Dust cover allows for the spray head to stay protected from debris when not in use
• Requires minimal maintenance and is equipped with test card to record weekly testing
• 243.8 cm swivel hose provides an extended coverage area to further optimize the irrigation process
• In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212)
• Per ANSI, “Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them.”

Model 8901RFK AXION body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2″ IPS.

In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI, “Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them.”

Haws 8904 AXION deck mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.

• Dust cover allows for the 8904 AXION to stay protected from debris when not in use
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• 8 foot (243.8 cm) green hose provides an extended coverage area to further optimize the irrigation process
• In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 9003R is a reliable din-rail or panel-mountable receiver that is designed to receive a wireless signal from a Honeywell Limitless® digital input. The WDRR receiver then communicates the Limitless® digital input status (i.e. switch open or closed) to a PLC (programmable logic controller) or any host controller capable of NPN/PNP-type inputs. This wireless solution can save up to 60% compared to traditional wired solutions by eliminating the need for conduit, connectors, and wire while significantly reducing installation and labor costs. Accommodating up to 14 Limitless® digital inputs, this receiver is for applications requiring multiple wireless inputs.

The Haws 8605WC AXION barrier-free enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the entire unit is pre-built and fully pressure tested
• Solid reinforced molded fiber glass booth makes for a private free standing piece of emergency equipment

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome