Model H1119.8 “Hi-Lo” barrier-free electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.
- 100% lead-free waterways.
- 18 gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long lasting life
- One piece rectangular bowl is designed for extra durability and maintenance ease
- Beautiful satin finish resists stains and corrosion
Model H1119.8 meets all current Federal Hawsmanufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, and Section 9.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
9202E – Thermostatic Mixing ValveModel 9202E Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate measurement.)
- A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
- Cold water by-pass valves are closed during normal operation, regardless of flow rate.
CSA Certified to ASSE 1071 and applicable sections of CSA B125.3.
9201H – Thermostatic Mixing ValveModel 9201H, lead-free Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet downstream for the most accurate measurement.)
- A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
- Modular lead-free brass design with internal check stops
- Oversized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C)
- Tempered water: High temperature limit is factory set to 87® F (30® C)
- Cold water by-pass valves are closed during normal operation, regardless of flow rate
Listings: ASSE 1071, CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).
9201EW – Thermostatic Mixing ValveModel 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)
- A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
- Modular brass design with supplied check valves
- Over-sized valve seats resist failures caused by foreign matter
- Efficient funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.
9201EFE – Thermostatic Mixing ValveModel 9201EFE Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)
- A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
- AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Outlet temperature is factory set to 85® F (29® C).
- Tempered water: High temperature limit is factory set to 90® F (32® C).
- Cold water by-pass valves are closed during normal operation, regardless of flow rate.
CSA Certifies this product to perform according to the ASSE 1071 standard and applicable sections of CSA B125.3.
Thermostatic Mixing Valve – 117 liters/minThe Haws® thermostatic mixing valve model 9201E mixes hot and cold water and provides a safe tepid water supply for emergency showers and eyewash stations. Flow range of 4 to 117 liters/minute provides service for one emergency combination shower or multiple eyewashes, reducing complexity and hardware costs.
Technical information thermostatic mixing valve model 9201E
- Outlet temperature factory setting: 26°C.
- Maximum operating pressure: 8.62 bar.
- Temperature adjustment range: 16 – 35° C.
- Maximum inlet temperature: 82° C.
- Recommended inlet temperature: 60° C.
- Minimum inlet temperature: 49° C
- Water inlets: BSP 1-1/4″
- Water outlet: BSP 1-1/4″
Characteristics
- Best-in-class cold water bypass flow (65% of rated tempered water flow) means continued protection under adverse conditions.
- Actively suspends hot water flow when cold water supply is lost to protect against scalding.
- Lowest internal pressure drop for this valve class – essential where supply pressure is low.
- Paraffin-based thermal actuation technology keeps outlet temperature within tight specifications to prevent scalding and hypothermia.
- Superior shuttle design combined with premium material selection eliminates valve binding and reduces maintenance costs.
- Innovative funnel design generates turbulent flow to ensure consistent temperature blending across entire flow range.
- Lime and calcium resistant materials used throughout prevent valve sticking and provide a long service life.
Model 8355WCW AXION barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Easy access exterior mounted in-line strainer
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with electro-polished finish
- Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8327 AXION – AXION® MSR Emergency Shower and Eye/Face Wash with grateModel 8327 AXION combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal shower heads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Also features a stainless steel grate for shower and eye was activation, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability
- Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ NPT
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
The Haws® all stainless steel combination emergency shower 8330 AXION consists of an emergency body shower with stainless steel head and an eyewash station with stainless steel bowl. It complies to the standards EN 15154-1, EN 15154-2 and ANSI Z358.1 and is the optimal solution for industrial applications where highest corrosion resistance is required. All components are made of stainless steel and makes this freestanding combination shower extremely corrosion resistant and very rugged.
The combination emergency shower 8330 AXION comprises an AXION® overhead drench shower and an AXION face+eyewash. The eyewash is activated by a push plate and delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The AXION nozzle of the drench shower is activated by a pull-down handle and delivers a soft and homogenous flow across the entire footprint. The unique AXION system eliminates the main issues of other emergency shower and eyewash systems to provide proper first aid.
Technical information
- Water flow body shower: 76 liters/minute
- Water flow face+eye wash: 14 liters/minute
- Dimensions (H x W x D): 2410 x 351 x 872 mm
- Water inlet: G 1 1/4”
- Water outlet: G 1 1/4″
Characteristics Emergency Shower 8330 AXION
- Pre-built and water/pressure tested
- Highest corrosion resistance as all components are made of type 304 stainless steel.
- Increased safety due to AXION face+eyewash head, AXION shower nozzle and integral flow control
- Corrosion resistant 28 cm stainless steel bowl
- Corrosion resistant 28 cm stainless steel shower head
- Corrosion resistant stainless steel ball valves equipped with stainless steel ball and stem
- Corrosion resistant stainless steel in-line mesh strainer to prevent debris from reaching the eyewash.
- 1-1/4″ stainless steel pipe and fittings
- Cast finished stainless steel 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
The Haws 8336 AXION combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Emergency combination unit is equipped with Type 316 Stainless Steel ball valves and constructed of green epoxy finished, Schedule 80 PVC pipe and fittings which are resistant to corrosion
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
8355WCC AXION – AXION® MSR Barrier-Free Recessed Shower and Eye/Face WashModel 8355WCC AXION barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling
- Easy access exterior mounted in-line strainer
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with electro-polish finish
- Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8356WCC AXION – AXION® MSR Barrier Free Recessed and Shower Eye/Face WashModel 8356WCC AXION barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity.
Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling
- Easy access exterior mounted in-line strainer
- One piece drain tray catches waste fluid during eyewash use
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with electro-polished finish
- Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.