Model 7261 AXION pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 28 cm green ABS plastic receptor and 1-1/4″ BSP galvanized stanchion
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ BSP. Waste: 1- 1/4″ BSP
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Wall mount eye wash 7324 AXION – without bowlHaws 7324 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Unit is equipped with a pop-off dust cover, so when debris is present, the irrigation process stays protected
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Floor drain is recommended for this unit
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Wall mount eye wash 7460B AXION – stainless steel bowlThe Haws® eye wash model 7460B AXION is the optimal solution for industrial applications where high corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. The stainless steel bowl makes this permanently installed eye wash corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7460B also includes a chromate-protected cast aluminum wall bracket, yellow plastic pop-off dust cover for eye wash head and a safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 376 x 358 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye Wash 7460B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable chrome-plated brass stay-open ball valve with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Model 7460BT AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/2″ NPT
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Wall mount eye wash 7360BTWC AXION – barrier-free – stainless steelThe Haws 7360BTWC AXION barrier-free emergency eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and flip top dust covers, so when debris is present, the irrigation process stays protected. Space efficient design allows the 7360BTWC AXION to be mounted in a number of easily accessible locations while providing a barrier-free standard.
- Low profile design accommodates wheelchair access
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Pedestal mount eyewash 7461 AXION – stainless steel bowlThe Haws® eyewash model 7461 AXION is the optimal solution for industrial applications where high corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. The stainless steel bowl makes this permanently installed face+eyewash corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 935 x 370 x 281 mm
- Water inlet: G 1/2″
- Water outlet: G 1 1/4″
Characteristics Eyewash 7461 AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable chrome-plated brass stay-open ball valve with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris
- Hot-dipped galvanized steel pipe and fittings
- Powder-coated cast-iron 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Haws emergency eyewash systems, like the freeze protected 7433FP AXION, use AXION head that activate with the push of a stainless steel flag. Head comes equipped with pop-off dust cover, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP AXION to be mounted in a number of easily accessible locations.
- A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
- Fully functional in freezing environments when installed properly
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
7460 AXION – AXION® MSR Unmounted Eye/Face WashModel 7460 AXION unmounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Portable Eyewash 7500 – Gravity Fed – 60 litersThe Haws portable eyewash model 7500 is ideal for remote locations or where a continuous water supply is not available. The model 7500 features a 60 liters tank providing a continuous flow for 15 minutes. When the yellow spray arm is pulled down, the model 7500 delivers instantly a soft stream that rinses both eyes. Wall or shelf mounted, this portable self-contained portable eyewash can be placed virtually anywhere on a working environment.
Technical information Portable Eyewash 7500
- Delivers 15 minutes flushing time
- 60 l high-density green polyethylene tank
- Dimensions (H x W x D): 572 x 546 x 495 mm
- Meets the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
Characteristics
- Ideal where mains water supply is not available
- Suitable for indoor and outdoor use
- Easy activation via pull-down yellow spray arm
- Wide opening for quick and easy filling, cleaning and inspection
- Easy relocation due to top and side handles
- Wall mounting bracket included
- Optional insulated jacket 9125 for protection against freezing or overheating
- Optional water additive 9082 for preservation of the water for up to 4 months
Haws heated portable Model 7500EB is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7500’s full patterned flushing feature, and its capability of being used in sub-freezing temperatures, those working in remote areas can’t help but feel confident with this piece of emergency equipment day after day.
- Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
- 1000 Watt, 120 VAC submersible thermostatically controlled heater element
- Fully functional to -30® F (-34.4® C) and should stay between 65® and 75® F (18.3 and 23.9® C)
- Model supplied with 8′ (243.8 cm) power cord, 3-prong plug, and fitted insulated protective cover
- A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
- Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
- Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)
Model 7500EB is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Portable Eyewash 7501 – Gravity Fed – 34 litersThe Haws portable eyewash model 7501 is ideal for remote locations or where a continuous water supply is not available. It features a 34 liters tank providing a continuous flow for 15 minutes. When the yellow spray arm is pulled down, the portable eyewash delivers instantly a soft stream that rinses both eyes. Wall mounted, this portable self-contained portable eyewash can be placed virtually anywhere on a working environment.
Technical information Portable Eyewash 7501
- Delivers 15 minutes flushing time
- 34 l green high-density polyethylene tank
- Dimensions (H x W x D): 368 x 559 x 257 mm
- Meets the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
Characteristics
- Ideal where fixed water supply is not available
- Suitable for indoor and outdoor use
- Easy activation via pull-down yellow spray arm
- Wide opening for quick and easy filling, cleaning and inspection
- Easy relocation due to top and side handles
- Wall mounting bracket included
- Optional insulated jacket 7501BL240 for protection against freezing or overheating
- Optional water additive 9082 for preservation of the water for up to 4 months
Model 7501BL NEMA 3R heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -30°F (-34°C). The self-contained blanket easily installs on to existing model 7501 units. Eyewash and heating blanket offered as a package or individually. 120V electrical requirement with supplied 8′ GFCI power cord. Voltage and Haz Loc options available. Built with CSA certified components.