Mounting plate MTG.3500 with 6″ (15.2 cm) anchors provide an additional amount of anchoring support and is designed to assist in the installation of the heavy-duty series fountains. Specifically to be used in the pedestal models 3500, 3500FR, and 3500D. Set in place during the base concrete pour, this anchored mounting plate allows the fountain to be easily and quickly installed.
- Stainless steel construction with 6″ (15.2 cm) welded zinc anchors provides a solid support system for the pedestal fountain.
Anchors with bolts and washers, MTG.3501, provides an additional amount of support and is designed for use with the heavy-duty line of fountains. Specifically to be used with the 3500 series fountains. Set in place during the base concrete pour, this anchored mounting plate allows the heavy-duty series fountains to be easily and quickly installed.
- Galvanized 6″ (15.2 cm) steel anchors along with 5/8″ x 1-1/2″ (1.6 x 3.8 cm) stainless steel bolts and washers provide a solid support system for the pedestal fountains.
MTGFR.17 – Mounting FrameIn-wall mounting frame, like the MTGFR.17, provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during rough-in phase of construction, this mounting frame allows the H1117.8 fountain to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for this dual bubbler fountain that is not only sturdy bu provides corrosion resistance as well.
- Wall opening size required is 31-1/8″ wide, 36-1/4″ high, and 12″ deep (79.1 x 92.1 x 30.5 cm).
In-wall mounting frame, like the MTGFR.7, provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during “rough-in” phase of construction, this mounting frame allows the H1107.8 fountain to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for the single bubbler fountain that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 14″ wide, 25-13/16″ high, and 12″ deep (35.6 x 65.6 x 30.5 cm).
In-wall mounting frame, like the MTGFR.DF1, provides the maximum support and facilitates the installation of single bubbler ‘swirl bowl’ series fountains. Mounted during “rough-in” phase of construction, this mounting frame allows the single bubbler fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these single bubbler fountains that is not only sturdy but provides corrosion resistance as well.
Model MTGFR.DF2 provides the maximum support and facilitates the installation of “Hi-Lo”, 1011MS and 1011HPSMS series fountains. Mounted during “rough-in” phase of construction, this mounting frame allows the “Hi-Lo’ fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides a certain amount of corrosion resistance as well.
Model MTGFR.LG provides the maximum support and facilitates the installation of “Hi-Lo”, electric drinking fountains. Mounted during “rough-in” phase of construction, this mounting frame allows the “Hi-Lo” fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for the dual bubbler fountains that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 31-1/8″ wide, 37-5/8″ high, and 12″ deep (79.1 x 95.6 x 30.5 cm).
Model MTGFR.SM provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during “rough-in” phase of construction, this mounting frame allows for many single bubbler fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 14-1/8″ wide, 32-1/8″ high, and 12″ deep (35.9 x 81.6 x 30.5 cm).
Model PA3177, stainless steel access plate for main pedestal. Dimensions are 8-3/8″ wide x 12-1/4″ high.
PAB3000 – Access PlateModel PAB3000 is an access plate, 5″ x 6″ (12.7 x 15.2 cm) without hole, to cover optional hose bib area.
PBA6 – Valve ButtonModel PBA6 flanged push button assembly is used with push button valve 5874, is made of polished chrome-plated brass, and includes the push button with front adjusting screw, operator, round locknut, snap ring, and wave washer. This model is used on flush mounted (not recessed) front stainless steel drinking fountain models.
PBA7 – Valve ButtonModel PBA7 push button assembly is used with push button valve 5874, is made of polished chrome-plated brass, and includes the push button with front adjusting screw, operator, round locknut, snap ring and wave washer. This model is used on drinking fountains with front recessed push buttons and for drinking fountains with thick walls.
