Les unités de laboratoire comme la douche oculaire/faciale amovible 7611 AXION incluent un ensemble AXION MSR de pomme de rinçage des yeux et du visage salué par la profession médicale (brevet déposé). Cette conception révolutionnaire à  jet inversé est le seul produit sur le marché qui fournisse une réponse médicale supérieure respectant tous les protocoles médicaux (de salle d’urgence comme de cabinet médical) en délogeant les contaminants de la cavité nasale vulnérable. Les douches oculaires traditionnelles lavent du rebord extérieur de l’œil vers le nez, où les produits contaminants peuvent alors être refoulés dans la cavité nasale en passant par le point lacrymal, notre cavité naturelle d’écoulement.

• Le pare-poussière permet au 7611 AXION de continuer à  être protégé des débris en période de non-utilisation
• Douche oculaire dotée d’un jet à  vélocité verticale nulle avec écoulement laminaire uniforme pour un supplément de confort, de stabilité et d’efficacité
• Ne demande qu’un minimum de maintenance et est équipé d’une carte de test où noter tous les tests hebdomadaires
• Sa conception à  fixation latérale permet à  l’unité d’être montée d’un côté ou de l’autre de l’évier pour mieux correspondre à  la diversité des sites
• Solutions de régulation conformes à la norme ANSI Z358.1
• Conforme EN 15154

Certifié par la CSA (Canadian Standards Association) : conforme à  la norme ANSI Z358.1 pour les équipements de douche oculaire et de douche d’urgence

Les unités de laboratoire comme la douche oculaire/faciale rabattable 7610 AXION sans barrière à  fixation murale ou sur comptoir incluent l’ensemble AXION MSR de pomme de rinçage des yeux et du visage salué par la profession médicale (brevet déposé). Cette conception révolutionnaire à  jet inversé est le seul produit sur le marché qui fournisse une réponse médicale supérieure respectant tous les protocoles médicaux (de salle d’urgence comme de cabinet médical) en délogeant les contaminants de la cavité nasale vulnérable. Les douches oculaires traditionnelles lavent du rebord extérieur de l’œil vers le nez, où les produits contaminants peuvent alors être refoulés dans la cavité nasale en passant par le point lacrymal, notre cavité naturelle d’écoulement.

• Unité pouvant être fixée au mur ou sur comptoir avec instructions faciles de permutation
• Les grands bras rabattables sont conçus pour permettre l’accès aux fauteuils roulants
• La douche oculaire/faciale assure un jet à  vélocité verticale nulle avec écoulement laminaire uniforme pour un supplément de confort, de stabilité et d’efficacité
• Le pare-poussière garantit au 7610 AXION une protection continue contre les débris même quand il n’est pas en service
• Activation et désactivation à  un angle de 30 degrés par rapport à  l’horizontale pour éviter que l’eau n’éclabousse trop le comptoir ou le mur
• La fixation à  l’arrière permet à  l’évier de rester disponible pour d’autres utilisations
• Solutions de régulation conformes à la norme ANSI Z358.1
• Conforme EN 15154

Certifié par la CSA (Canadian Standards Association) : conforme à  la norme ANSI Z358.1 pour les équipements de douche oculaire et de douche d’urgence.

Model 6275 compression hose bib faucet is designed to activate through a turn knob on the top of the unit.

• Connection is 3/4″ male hose thread x 1/2″ IPS inlet.

Model 6250LF bib faucet is designed with a self-closing lever action, extension nipple, and tee to precisely control water flow. Combining the constructed lead-free brass, with polished chrome-plated finish, this faucet is sure to last.

• Connection is 1/2″ IPS inlet.
• (A special access plate is needed if used with 3511, and part 0004499489 is required when used with Haws cement products)
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act. .

Model 5851LF is a panel mounted valve, self-closing, polished, chrome-plated, vandal-resistant lever handle with rough brass body. Dimensions: wall thickness maximum, 1″ (2.5 cm); size of hole required, 1-1/16″ diameter (2.7 cm). 3/8″ NPT(F) inlet and outlet. Replaces Models 5855 and 5856.

Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act. .

Model 5830LF is a polished chrome-plated, lead-free brass lever handle, self-closing valve. Features screwdriver adjustment stream control. 1/2″ NPT(F) inlet by 1/4″ NPT(F) outlet. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act. .

Model 5720 solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the constructed lead-free solid brass with a polished chrome-plated finish, this bubbler is sure to last. Unit comes further equipped with matching mounting lock washer with lugs to prevent unit from spinning.

• Angled stream discourages direct mouth contact making the drinking area much more sanitary.
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act. .

Model 5017LF drinking faucet is designed with a shielded bubbler and self-closing push button with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy to keep clean.

• Drinking faucet includes: basin shank, locking pin, and mounting hardware
• Dimensions: 2″ (5.1 cm) high forged brass bubbler head with a 1/2″ O.D. (1.3 cm) slip-joint inlet.
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act. This product meets ADA requirements, and is compliant to California Health and Safety Code 116875 (AB 1953-2006)

Model 5705 solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the constructed solid brass with a polished chrome-plated finish, this bubbler is sure to last. Unit comes further equipped with vandal resistant mounting with lock nut, washer, and pin to prevent unit from turning.

• 100% lead-free waterways
• Angled stream discourages direct mouth contact making the drinking area much more sanitary
• Laminar flow insert prevents splashing so the drinking stream and area stay contained
• Dimensions: Overall height is 3-3/16″ (8.4 cm). Connection is a 1/4″ IPS inlet
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act.

Model 5703M solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the solid forged brass with a polished chrome-plated finish, this bubbler is sure to last. Unit comes further equipped with lock nut and washers to be used when mounting.

• 100% lead-free waterways
• Angled stream discourages direct mouth contact making the drinking area much more sanitary
• Dimensions: Height is 3″ (7.6 cm). Connection is a 3/8″ compression inlet
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act.

Model 5701SL solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the constructed lead-free solid forged brass with a polished chrome-plated finish, this bubbler is sure to last. Unit comes further equipped with vandal-resistant mounting slot and lock washer to be used when mounting.

• Angled stream discourages direct mouth contact making the drinking area much more sanitary.
• Dimensions: Height is 3″ (7.6 cm). Connection is a 1/4″ inlet.
• Note: Unit does not include mounting hardware. If needed please see Model 5720.
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act. .

Model 5701 solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the constructed lead-free solid forged brass with a polished chrome-plated finish, this bubbler is sure to last.

• Angled stream discourages direct mouth contact making the drinking area much more sanitary.
• Dimensions: Height is 3″ (7.6 cm). Connection is a 1/4″ IPS inlet.
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, and the Federal Safe Drinking Water Act. .

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome