Model SK3HPS is a wrap around matching high polished finished stainless steel cane touch skirt for installation on the high unit in some applications that may need to comply with ADA protruding objects guidelines. For use on Models 1011HPS and H1011.8HPS.
HCR8.50 – Refroidisseur à distanceModèle HCR8.50 : refroidisseur à distance à 220 Volt et 50 Hz qui fournit 8 gallons (30,3 L) d’eau froide par heure. Cet appareil à distance peut fournir de l’eau rafraîchie à une grande variété de fontaines de style moderne. Le refroidisseur peut être dissimulé sous un comptoir, entre des murs ou à l’intérieur de ces derniers (vérifier les règlements locaux) ou bien en haut d’un mur ou d’une colonne. Idéal pour les usines, cafétérias, restaurants, écoles et bureaux. Autres utilisations possibles : prérefroidissement des distributeurs de boissons fraîches et des fontaines, rafraîchissement des liquides de refroidissement des machines, développement de photographies et films radiographiques, travail expérimental en laboratoire ou amplification des capacités des machines à glaçons. Le modèle HCR8.50 de refroidisseur à distance de 8 gal/h (30,3 L/h) comporte un cabinet en acier galvanisé épais.
Le système de réfrigération est conçu pour permettre un fonctionnement à basse énergie et sa longue durée de vie est garantie par l’utilisation d’un compresseur à déplacement important, d’un évaporateur de refroidissement/d’un refroidisseur à contrecourant, d’un dimensionnement capillaire efficace, d’un déshydrateur ou filtre grande capacité et d’un condensateur refroidi par ventilateur avec échange de chaleur maximal. Le réfrigérant écologique R134a est contrôlé par tube capillaire calibré. Les refroidisseurs à distance refroidis à l’air exigent une bonne circulation de l’air pour bien fonctionner. Tout refroidisseur monté sous un comptoir doit être équipé d’une ventilation adéquate.
Lorsque le refroidisseur est installé dans un mur, s’assurer qu’il puisse toujours être enlevé sans endommager le refroidisseur lui-même ou le mur. Laisser au minimum 1 po (2,5 cm) d’espace libre et un minimum de 4 po (1à cm) d’espace libre à l’arrière. L’unité est fournie avec des fils électriques à l’intérieur de la boîte électrique 220 Volt, 50 Hz, monophasée. La capacité est basée sur la norme ARI dans des conditions nominales d’une eau potable à 50° F (10° C), d’une eau d’alimentation à 80° F (26° C) et d’une température ambiante à 90° F (32° C).
Sorties multiples : le modèle HCR8.50 est capable de fournir un maximum de 2 postes (barboteur, remplissage de verre). La conduite d’alimentation du poste doit être isolée de manière adéquate et ne pas se trouver à plus de 7 pi (2,12 m) du refroidisseur.
Note : les refroidisseurs d’eau électriques ne sont ni recommandés ni conçus pour des utilisations en plein air ou des sites à piscine fermée (chlore). De telles conditions peuvent annuler la garantie.
MTG.3500 – Mounting PlateMounting plate MTG.3500 with 6″ (15.2 cm) anchors provide an additional amount of anchoring support and is designed to assist in the installation of the heavy-duty series fountains. Specifically to be used in the pedestal models 3500, 3500FR, and 3500D. Set in place during the base concrete pour, this anchored mounting plate allows the fountain to be easily and quickly installed.
- Stainless steel construction with 6″ (15.2 cm) welded zinc anchors provides a solid support system for the pedestal fountain.
Anchors with bolts and washers, MTG.3501, provides an additional amount of support and is designed for use with the heavy-duty line of fountains. Specifically to be used with the 3500 series fountains. Set in place during the base concrete pour, this anchored mounting plate allows the heavy-duty series fountains to be easily and quickly installed.
- Galvanized 6″ (15.2 cm) steel anchors along with 5/8″ x 1-1/2″ (1.6 x 3.8 cm) stainless steel bolts and washers provide a solid support system for the pedestal fountains.
MTGFR.17 – Mounting FrameIn-wall mounting frame, like the MTGFR.17, provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during rough-in phase of construction, this mounting frame allows the H1117.8 fountain to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for this dual bubbler fountain that is not only sturdy bu provides corrosion resistance as well.
- Wall opening size required is 31-1/8″ wide, 36-1/4″ high, and 12″ deep (79.1 x 92.1 x 30.5 cm).
In-wall mounting frame, like the MTGFR.7, provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during « rough-in » phase of construction, this mounting frame allows the H1107.8 fountain to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for the single bubbler fountain that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 14″ wide, 25-13/16″ high, and 12″ deep (35.6 x 65.6 x 30.5 cm).
In-wall mounting frame, like the MTGFR.DF1, provides the maximum support and facilitates the installation of single bubbler ‘swirl bowl’ series fountains. Mounted during « rough-in » phase of construction, this mounting frame allows the single bubbler fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these single bubbler fountains that is not only sturdy but provides corrosion resistance as well.
Model MTGFR.DF2 provides the maximum support and facilitates the installation of « Hi-Lo », 1011MS and 1011HPSMS series fountains. Mounted during « rough-in » phase of construction, this mounting frame allows the « Hi-Lo’ fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides a certain amount of corrosion resistance as well.
Model MTGFR.LG provides the maximum support and facilitates the installation of « Hi-Lo », electric drinking fountains. Mounted during « rough-in » phase of construction, this mounting frame allows the « Hi-Lo » fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for the dual bubbler fountains that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 31-1/8″ wide, 37-5/8″ high, and 12″ deep (79.1 x 95.6 x 30.5 cm).
Model MTGFR.SM provides the maximum support and facilitates for the installation of single height electric drinking fountains. Mounted during « rough-in » phase of construction, this mounting frame allows for many single bubbler fountains to be easily and quickly installed.
- Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides corrosion resistance as well.
- Wall opening size required is 14-1/8″ wide, 32-1/8″ high, and 12″ deep (35.9 x 81.6 x 30.5 cm).
Model PA3177, stainless steel access plate for main pedestal. Dimensions are 8-3/8″ wide x 12-1/4″ high.
PAB3000 – Access PlateModel PAB3000 is an access plate, 5″ x 6″ (12.7 x 15.2 cm) without hole, to cover optional hose bib area.