The 7360BTWC AXION eyewash with wall bracket and trap is ideal for all work environments, including for people with limited mobility. Thanks to its particularly flat design, it is easily accessible for wheelchair users. The stainless steel basin ensures high corrosion resistance and a long service life. This eyewash meets the international EN 15154-2 and ANSI Z358.1 standards. The patented AXION showerhead ensures a standard-compliant water jet for efficient flushing of the eyes and face.
Technical data wall-mounted eyewash 7360BTWC AXION
- Flow rate: 14 liters/minute
- Dimensions (H x W x D): 650 x 376 x 470 mm
- Water inlet: 1/2” NPT
- Water drain: 1-1/2” NPT
Key Features
- Extra-low profile design for easy access by wheelchair users
- Pre-assembled and fully hydro- and pressure-tested
- AXION technology with integrated flow control for a compliant water jet
- Corrosion-resistant 11-inch (28 cm) stainless steel 1.4301 (AISI 304) bowl
- Reliable chrome-plated brass ball valve with stainless steel ball and stem
- Chrome-plated brass mesh screen prevents floating particles in the water from entering the eyes
- Includes wall bracket
- Includes trap
- Includes universal safety sign
- Meets EN 15154 and ANSI Z358.1 standards
- Wide range of options for adaptation to local requirements
Ordering information 7360BTWC AXION
- Country of origin: USA
- Item number: 10004457
The self-draining, freeze-protected eyewash station 7431FP AXION remains fully operational even at temperatures below freezing and ensures quick first aid in an emergency. The freeze protection valve is installed below the frost line in the ground.
Activation is via a push flag that actuates the freeze protection valve.
The pedestal-mounted frost-proof eyewash features a corrosion-resistant stainless steel basin.
The patented AXION showerhead reliably delivers a standard-compliant water jet for efficient flushing of the eyes and face.
Technical data for frost-proof eyewash station 7431FP AXION
- Flow rate: 14 liters/minute
- Dimensions (H x W x D): 1036 x 280 x 735 mm
- Water inlet: 1/2“ BSP
- Water outlet: 1-1/4” BSP
Key features
- Pre-assembled and fully water and pressure tested
- AXION technology with integrated flow control for a standard-compliant water jet
- Corrosion-resistant 11-inch (28 cm) stainless steel 1.4301 (AISI 304) bowl
- Includes universal safety sign
- Meets EN 15154 and ANSI Z358.1 standards
- Wide range of options for adaptation to local requirements
Ordering information 7431FP AXION
- Country of origin: Switzerland
- Item number: 10004461
The 7461 AXION green PC pedestal-mounted eyewash station is the ideal solution for industrial applications where flexible placement and additional protection are required. Thanks to its green powder coating, it offers increased resistance to environmental influences and mechanical loads.
It is particularly suitable for the chemical and pharmaceutical industry, petrochemicals, water treatment plants and all industrial applications that require high corrosion resistance. The stainless steel collection basin ensures high corrosion resistance and a particularly long service life.
The pedestal-mounted eyewash station complies with international standards EN 15154-2 and ANSI Z358.1 and, with the patented AXION showerhead, ensures a standard-compliant water jet for efficient flushing of eyes and face.
Technical data – eyewash station 7461 AXION green PC with green powder coating
- Flow rate: 14 liters/minute
- Dimensions (H x W x D): 954 x 369 x 286 mm
- Water inlet: 1/2“ BSP
- Water outlet: 1-1/4” BSP
Key features
- Green powder coated – increases resistance to environmental influences and mechanical loads
- Pre-assembled and fully water and pressure tested
- AXION technology with integrated flow control for a standard-compliant water jet
- Corrosion-resistant 28 cm stainless steel bowl made of 1.4301 (AISI 304)
- Reliable chrome-plated brass ball valve with stainless steel ball and stem
- Chrome-plated brass screen prevents suspended matter in the water from entering the eyes
- Includes universal safety sign
- Meets EN 15154 and ANSI Z358.1 standards
- Wide range of options for adaptation to local requirements
Ordering information 7461 AXION green PC
- Country of origin: Switzerland
- Item number: 10007633
8320 AXION von Haws® mit einer Körper-Notdusche mit ABS-Kunststoffkopf und einer Augendusche mit Becken aus ABS-Kunststoff. Sie ist die ideale Lösung und industrielle Anwendungen, bei denen eine flexible Platzierung und zusätzlicher Schutz gefragt. Dank der grünen Pulverbeschichtung bietet sie eine erhöhte Widerstandsfähigkeit gegenüber Umwelteinflüssen und mechanischer Beanspruchung.
Die Kombinations-Notdusche 8320 AXION besteht aus einer AXION®-Körperdusche und einer AXION Augendusche. Die Augendusche wird durch eine Druckplatte aktiviert und liefert zuverlässig einen sanften Wasserstrahl zum gleichzeitigen Spülen von Augen und Gesicht. Die AXION-Düse der Körperdusche wird durch eine Zugstange aktiviert und liefert einen weichen und homogenen Strahl über die gesamte Grundfläche. Das einzigartige AXION-System vermeidet die meisten Probleme, die andere Systeme haben, um sicher Erste Hilfe zu gewährleisten.
Technische Daten
-
Volumenstrom Körperdusche: 76 Liter/Minute
-
Volumenstrom Augendusche: 14 Liter/Minute
-
Abmessungen (H x B x T): 2429 x 365 x 860 mm
-
Wasserzulauf: G 1 1/4″
-
Wasserablauf: G 1 1/4″
Merkmale
-
Vormontiert und vollständig wasser- und druckgeprüft
-
Erhöhte Sicherheit durch AXION Augenwaschkopf, AXION Körperdusche und integrierte Durchflusskontrolle
-
Robuster 28 cm grosses Becken aus grünem ABS-Kunststoff
-
Robuster 28 cm grosser Duschkopf aus grünem ABS-Kunststoff
-
Zuverlässige offenbleibende Kugelventile aus verchromtem Messing mit Kugel und Spindel aus Edelstahl
-
Verchromtes Messing-Sieb zur Verhinderung von Verschmutzungen
-
1 1/4″ feuerverzinktes Stahlrohr und Fittinge
-
Pulverbeschichteter Bodenflansch aus Gusseisen mit 23 cm Durchmesser
-
Inklusive universellem Sicherheitsschild
-
Vielfältige Optionen zur Anpassung an die Anforderungen vor Ort
The Haws® 8300 AXION green PC combined safety shower with an ABS plastic safety shower head and an eyewash with a stainless steel basin meets the EN 15154 and ANSI Z358.1 standards. It is the optimal solution for industrial applications where flexible placement and additional protection are required. Thanks to the green powder coating, it offers increased resistance to environmental influences and mechanical stress.
The 8300 AXION green PC combination safety shower consists of an AXION® body shower and an AXION eyewash. The eyewash is activated by a push flag and reliably delivers a gentle stream of water to simultaneously rinse the eyes and face. The AXION nozzle of the body shower is activated by a pull rod and delivers a soft and homogeneous jet over the entire floor area. The unique AXION system avoids most of the problems that other systems have, to ensure safe first aid.
Technical data
- Flow rate of body shower: 76 liters/minute
- Flow rate of eyewash: 14 liters/minute
- Dimensions (H x W x D): 2363 x 351 x 902 mm
- Water inlet: G 1 1/4“
- Water outlet: G 1 1/4”
Features
- Pre-assembled and fully water and pressure tested
- Increased safety thanks to AXION face and eye wash head, AXION body shower and integrated flow control
- Corrosion-resistant 28 cm stainless steel bowl
- Robust 28 cm showerhead made of green ABS plastic
- Reliable chrome-plated brass ball valves that remain open, with stainless steel ball and spindle
- Chromed brass strainer to prevent contamination
- 1 1/4” hot-dip galvanized steel pipe and fittings
- Powder-coated cast iron floor flange with a diameter of 23 cm
- Includes universal safety sign
- Various options for adaptation to local requirements
Hazardous chemical spills occur in isolated areas all over the world everyday and, Haws is working to position models like this pressurized 37 gallon (140 L) portable eyewash and body spray in such areas, providing a reliable source of safety for the irrigation process. More specifically, Model 7601.37 is able to do so by combining the use of twin soft-flo eyewash heads with a face and body-spray head.
- Features a 37 gallon (140 L) ASME rated stainless steel tank
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Includes a 6 foot (182.9 cm) hose that extends the body-spray reach expanding the unit’s protective capabilities
- Measurements: 60″ (152.4 cm) high, 27″ (68.6 cm) deep
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8300FP AXION – Emergency Freeze Protected Shower and EyewashThe Haws freeze protected 8300FP AXION combines the use of an ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Emergency combination unit is equipped with an in-line 50 x 50 mesh water strainer and pop-off dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit’s safety features include: universal emergency sign, high visibility stripe, two labeled push plates, and two self-draining bleed valves to protect from internal freezing.
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eyewash is pre-built and fully water/pressure tested
- Solid galvanized steel construction make for one sturdy piece of emergency equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7778B AXION – Wall mount eyewash – all stainless steelThe Haws® eye wash model 7778B AXION is the optimal solution for industrial applications where highest corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. All components are made of stainless steel and makes this permanently installed eye wash extremely corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7778B AXION also includes a stainless steel wall bracket, yellow plastic pop-off dust cover for eye wash head and eye wash safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 381 x 470 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye wash 7778B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable stainless steel type 304 ball valve equipped with stainless steel ball and stem
- Stainless steel type 304 in-line mesh strainer to prevent debris
- Robust stainless steel type 304 wall bracket
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Often times it is beneficial to have a hose unit like the 8901B AXION to assist in the irrigation process. The drench head can be easily activated with integral squeeze lever, providing a maximum coverage area for the body with its soft flowing streams of water. Unit is conveniently mounted using wall clips keeping the emergency equipment held firmly against the wall.
- Dust cover allows for the spray head to stay protected from debris when not in use
- Requires minimal maintenance and is equipped with test card to record weekly testing
- 243.8 cm swivel hose provides an extended coverage area to further optimize the irrigation process
- In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212)
- Per ANSI, “Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them.”
- EN 15154 compliant
Model 8901RFK AXION body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2″ IPS.
In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI, “Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them.”
8605WC AXION – AXION® MSR Booth Enclosed Shower and Eye/Face WashThe Haws 8605WC AXION barrier-free enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, the entire unit is pre-built and fully pressure tested
- Solid reinforced molded fiber glass booth makes for a private free standing piece of emergency equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8330 AXION – Freestanding Emergency ShowerThe Haws® all stainless steel combination emergency shower 8330 AXION consists of an emergency body shower with stainless steel head and an eyewash station with stainless steel bowl. It complies to the standards EN 15154 and ANSI Z358.1 and is the optimal solution for industrial applications where highest corrosion resistance is required. All components are made of stainless steel and makes this freestanding combination shower extremely corrosion resistant and very rugged.
The combination emergency shower 8330 AXION comprises an AXION® overhead drench shower and an AXION face+eyewash. The eyewash is activated by a push plate and delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The AXION nozzle of the drench shower is activated by a pull-down handle and delivers a soft and homogenous flow across the entire footprint. The unique AXION system eliminates the main issues of other emergency shower and eyewash systems to provide proper first aid.
Technical information
- Water flow body shower: 76 liters/minute
- Water flow face+eye wash: 14 liters/minute
- Dimensions (H x W x D): 2410 x 351 x 872 mm
- Water inlet: G 1 1/4”
- Water outlet: G 1 1/4″
Characteristics Emergency Shower 8330 AXION
- Pre-built and water/pressure tested
- Highest corrosion resistance as all components are made of type 304 stainless steel.
- Increased safety due to AXION face+eyewash head, AXION shower nozzle and integral flow control
- Corrosion resistant 28 cm stainless steel bowl
- Corrosion resistant 28 cm stainless steel shower head
- Corrosion resistant stainless steel ball valves equipped with stainless steel ball and stem
- Corrosion resistant stainless steel in-line mesh strainer to prevent debris from reaching the eyewash.
- 1-1/4″ stainless steel pipe and fittings
- Cast finished stainless steel 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site requirements