The Haws® 8300.158 AXION combined safety shower with an ABS plastic head drench shower and an eyewash with a stainless steel bowl. It is the optimal solution for many industrial applications and complies with the EN 15154 and ANSI Z358.1 standards.
The 8300-158 AXION® offers basic freeze protection for regions with infrequent, light sub-zero conditions. It features a freeze protection valve that allows water to drain once the temperature in the shower reaches freezing. This prevents the water from freezing without the need for full heating or draining. This solution is suitable for locations with temporary cold spells, where conventional safety showers could be at risk from freezing.
The 8300 AXION combination safety shower consists of an AXION® body shower and an AXION eyewash. The eyewash is activated by a push flag and reliably delivers a gentle stream of water to simultaneously rinse the eyes and face. The AXION nozzle of the body shower is activated by a pull rod and delivers a soft and homogeneous jet over the entire floor area. The unique AXION system avoids most of the problems that other systems have, to ensure safe first aid.
Technical data 8300.158 AXION
- Flow rate of body shower: 76 liters/minute
- Flow rate of eyewash: 14 liters/minute
- Dimensions (H x W x D): 2363 x 351 x 902 mm
- Water inlet: G 1 1/4“
- Water outlet: G 1 1/4”
Features 8300.158 AXION
- Pre-assembled and fully water and pressure tested
- Enhanced safety through AXION eyewash head, AXION body shower and integrated flow control
- Corrosion-resistant 28 cm stainless steel bowl
- Robust 28 cm showerhead made of green ABS plastic
- Reliable chrome-plated brass ball valves with stainless steel ball and stem
- Chrome-plated brass strainer to prevent contamination
- 1 1/4” hot-dip galvanized steel pipe and fittings
- Powder-coated cast iron floor flange with a diameter of 23 cm
- Includes universal safety sign
- Various options for adapting to local requirements
The Haws® 8300 AXION green PC combined safety shower with an ABS plastic safety shower head and an eyewash with a stainless steel basin meets the EN 15154 and ANSI Z358.1 standards. It is the optimal solution for industrial applications where flexible placement and additional protection are required. Thanks to the green powder coating, it offers increased resistance to environmental influences and mechanical stress.
The 8300 AXION green PC combination safety shower consists of an AXION® body shower and an AXION eyewash. The eyewash is activated by a push flag and reliably delivers a gentle stream of water to simultaneously rinse the eyes and face. The AXION nozzle of the body shower is activated by a pull rod and delivers a soft and homogeneous jet over the entire floor area. The unique AXION system avoids most of the problems that other systems have, to ensure safe first aid.
Technical data
- Flow rate of body shower: 76 liters/minute
- Flow rate of eyewash: 14 liters/minute
- Dimensions (H x W x D): 2363 x 351 x 902 mm
- Water inlet: G 1 1/4“
- Water outlet: G 1 1/4”
Features
- Pre-assembled and fully water and pressure tested
- Increased safety thanks to AXION face and eye wash head, AXION body shower and integrated flow control
- Corrosion-resistant 28 cm stainless steel bowl
- Robust 28 cm showerhead made of green ABS plastic
- Reliable chrome-plated brass ball valves that remain open, with stainless steel ball and spindle
- Chromed brass strainer to prevent contamination
- 1 1/4” hot-dip galvanized steel pipe and fittings
- Powder-coated cast iron floor flange with a diameter of 23 cm
- Includes universal safety sign
- Various options for adaptation to local requirements
The Haws freeze protected 8300FP AXION combines the use of an ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Emergency combination unit is equipped with an in-line 50 x 50 mesh water strainer and pop-off dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit’s safety features include: universal emergency sign, high visibility stripe, two labeled push plates, and two self-draining bleed valves to protect from internal freezing.
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eyewash is pre-built and fully water/pressure tested
- Solid galvanized steel construction make for one sturdy piece of emergency equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8100 AXION – Floor Mount Emergency Drench ShowerHaws 8100 AXION AXION MSR free-standing drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with such safety features as the universal emergency sign and high visibility stripe this drench shower is easily spotted in emergency situations.
- A great addition to multiple unsafe environments where the body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, valve assembly is pre-built
- Solid construction from Schedule 40 hot-dipped galvanized steel make for one sturdy piece of corrosive resistant equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8309WC AXION – barrier-free Combination Shower and EyewashModel 8309WC AXION barrier-free combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Barrier-free design offers a low profile loop assembly allowing for better wheel chair access as well as a longer pull rod for shower activation
- Also features a stainless steel push flag for eyewash activation, a round 11″ (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, and ball valves with stainless steel ball and stem for durability
- Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ NPT
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8317 AXION – Emergency Shower and EyewashHaws 8317 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Solid galvanized steel construction makes for one sturdy piece of emergency equipment
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8320 AXION – Freestanding Safety ShowerThe Haws® combination safety shower 8320 AXION consists of an safety body shower with ABS plastic head and an eyewash station with ABS plastic bowl. It is the optimal solution for many industrial applications and complies to the standards EN 15154 and ANSI Z358.1. The ABS plastic bowl and showerhead make this freestanding combination shower corrosion resistant and very rugged.
The combination safety shower 8320 AXION comprises an AXION® overhead drench shower and an AXION face+eyewash. The eyewash is activated by a push plate and delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The AXION nozzle of the drench shower is activated by a pull-down handle and delivers a soft and homogenous flow across the entire footprint. The unique AXION system eliminates the main issues of other safety showers and eyewash systems to provide proper first aid.
Technical information Safety Shower 8320 AXION
- Water flow body shower: 76 liters/minute
- Water flow face+eye wash: 14 liters/minute
- Dimensions (H x W x D): 24296 x 365 x 860 mm
- Water inlet: G 1 1/4”
- Water outlet: G 1 1/4″
Characteristics
- Pre-built and water/pressure tested
- Increased safety due to AXION face+eyewash head, AXION shower nozzle and integral flow control
- Durable resistant 28 cm green ABS plastic bowl
- Durable 28 cm green ABS plastic shower head
- Reliable chrome-plated brass stay-open ball valves with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris from reaching the eyewash
- 1 1/4” hot-dipped galvanized steel pipe and fittings
- Powder-coated cast-iron 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
The Haws® combination safety shower 8300 AXION consists of an safety body shower with ABS plastic head and an eyewash station with stainless steel bowl. It is the optimal solution for many industrial applications and complies to the standards EN 15154 and ANSI Z358.1.
The combination safety shower 8300 AXION comprises an AXION® overhead drench shower and an AXION face+eyewash. The eyewash is activated by a push plate and delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The AXION nozzle of the drench shower is activated by a pull-down handle and delivers a soft and homogenous flow across the entire footprint. The unique AXION system eliminates the main issues of other safety showers and eyewash systems to provide proper first aid.
Technical information Safety Shower 8300 AXION
- Water flow body shower: 76 liters/minute
- Water flow face+eye wash: 14 liters/minute
- Dimensions (H x W x D): 2363 x 351 x 902 mm
- Water inlet: G 1 1/4”
- Water outlet: G 1 1/4″
Characteristics Safety Shower 8300 AXION
8111FP AXION – Freeze Protected Drench Shower
- Pre-built and water/pressure tested
- Increased safety due to AXION face+eyewash head, AXION shower nozzle and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Durable 28 cm green ABS plastic shower head
- Reliable chrome-plated brass stay-open ball valves with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris from reaching the eyewash
- 1 1/4” hot-dipped galvanized steel pipe and fittings
- Powder-coated cast-iron 23 cm diameter floor flange
- Including universal safety sign
- Wide range of options for adapting to on-site Safety shower requirements
Model 8111FP AXION AXION MSR freeze protected drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, this unit’s safety features include a universal emergency sign, and valve installation that protects unit from freezing.
- A great addition to multiple potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, valve assembly is pre-built
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.