Model SP829 AXION AXION® MSR 10-5/8″ (27 cm) ABS green plastic drench showerhead delivers dispersed flow for uniform drenching. This new hydrodynamic design minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Inlet 1″ NPT.
SP93 – Eyewash BowlModel SP93 is a Safety Green 11″ (27.9 cm) ABS plastic receptor resistant to damage from alkalies, salt solutions, oils and most acids. For use on most Eyewashes and Eye/Face Wash Stations series.
SP11FC – Eyewash HeadModel SP11FC is a Soft-Flo ABS plastic anti-surge eyewash head in Safety Green, with a built-in 1.2 gpm (4.5 L) automatic pressure compensation flow control. This assures a single, soft-and-steady stream of water for flowing water pressure ranging from 30 to 90 psi (2.1 to 6.2 bar). Flow control is easily accessible for cleaning. Supply: 1/4″ IPS.
SP12FC – Eyewash HeadModel SP12FCÂ is a soft PVC covered ABC plastic Soft-Flo, anti-surge eyewash head with 1/4″ IPS inlet and an inserted nozzle in orifice for use with portable tank eyewash units.
9091 – Dust CoverModel 9091 Dust Cover is for the AXION MSR eye/face wash head. One piece dust cover constructed of bright yellow durable ABS plastic.
9095PAIR – Dust CoverModel 9095PAIR Dust Cover is for use on all Haws Non-Portable Eyewash Units that feature the SP10, SP11, SP11FC or SP18 Soft-Flo heads. It keeps eyewash heads from contamination when not in use. The Safety Green polyethylene plastic cover with integral retainer strap automatically removes when water is turned on. Sold in pairs.
9015 – Eyewash GaugeModel 9015 eyewash gauge allows for easy testing of eyewashes per ANSI Standard Z358.1. Directions are in black on the clear Acrylic. Model 9015 also serves as a 6″ (15 cm) ruler.
9070 – FilterModel 9070 Filter is recommended for installation on all eyewash units for additional protection for eyes. Made of FDA approved polypropylene with disposable FDA approved viscose fiber filter media which removes particles down to 20 microns.
- Flow Capacity: 7 gpm (17.8 L) max (recommended).
- Maximum Working Pressure: 125 psi (8.62 bar)
- Size: 15″ (38.1 cm) overall by 5″ (12.7 cm) diameter
- Supply: 3/4″ IPS inlet and outlet.
The Haws 8336 AXION combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Emergency combination unit is equipped with Type 316 Stainless Steel ball valves and constructed of green epoxy finished, Schedule 80 PVC pipe and fittings which are resistant to corrosion
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment