The Haws® 9327CE stainless steel Instantaneous Electric Water Heater is designed to provide immediate tepid water for safety showers and eyewashes. In accordance with EN 15154 guidelines, tepid water, ideally between 20°C and 25°C, ensures that victims can use the emergency equipment for the recommended 15 minutes without the risk of hypothermia or scalding.
Capable of delivering between 9.5 and 151 liters per minute of tepid water, the 9327CE can feed either a combination safety shower or multiple eyewash stations. When activated, the instantaneous heater quickly heats the water to the set tepid temperature in a matter of seconds. The predictive control algorithm ensures precise temperature control (+/- 1°C at steady state flow) of the tepid water.
The 9327CE stainless steel Instantaneous Electric Water Heater simplifies installation by integrating directly into the cold water supply pipe for the safety equipment, eliminating the need for a thermostatic mixing valve. It is a safe and smart solution, providing endless tepid water for emergency equipment across all industries, including offshore applications.
Technical information Instantaneous Electric Water Heater 9327CE
- Voltage: 400 V
- Rated power: 50/75/100 or 120 kW
- Flow rate: max. 151 liters per minute
- Optimum operation pressure: 4.1 – 6.2 bar
- Standard temperature setting: 29.4 °C
- Dimensions (H x W x D) : 762 x 667 x 342 mm
- Cold water inlet: 1 1/4” NPT(M)
- Tepid water outlet: 1 1/4” NPT(M)
Key Features
- The CE certification affirms the conformity of instantaneous water heater 9327CE with European health, safety and environmental protection standards
- Parabolic Heat DesignTM enables fast water heating and minimal pressure drop
- Predictive control algorithm and diverse safety features for precise temperature control
- Field programmable and updatable firmware provide flexibility for future adaptations
- Thermo-optical sensor for monitoring infrared elements ensures high operational reliability
- Thermo-optical sensor for protection against entrained air or improper commissioning
- Robust cabinet made of 304 or 316 stainless steel allows for indoor and outdoor installation (IP 66 / NEMA 4X)
- Wide range of factory-installed options available to meet on-site requirements
Benefits
- Increased employee safety: Allows employees to remain in the tepid water flush for the required 15 minutes without the risk of hypothermia or scalding
- Reduced energy consumption: The instantaneous water heater not only reduces energy consumption but also promotes sustainability. By consuming power only when actively heating water, it minimizes unnecessary energy usage, contributing to a greener and more eco-friendly approach
- Low energy and maintenance costs: The low energy and maintenance costs of this system contribute to a sustainable approach by eliminating the need for continuously heated water in stand-by systems. By efficiently using energy only when necessary, the system reduces overall energy consumption, resulting in lower carbon emissions and environmental impact
- Reduced legionella risk and improved hygiene: By eliminating standing tepid water in the system, the risk of Legionella growth is reduced, promoting a healthier environment with improved overall hygiene
- Space-efficient design: Compared to alternative solutions, the instantaneous heater has a small footprint as it eliminates the need for boilers, pumps, and tepid water loops
- Flexible installation: Can be mounted on a wall above or near the emergency equipment to free up floor space
- Easy integration: Only requires a power cable, making it simple to integrate into existing solutions
- Reliable and safe operation: Maintains the defined water temperature (+/- 1°C at steady state flow) without the need for additional tanks, valves, pumps, or other features
- Compliance with standards: The instantaneous water heater complies with the CE standard and is suitable for use with eye wash stations and emergency showers according to EN 15154 or ANSI.Z358
- Retrofitting and new system suitability: The 9327CE instantaneous heater can be used for both retrofitting existing installations and implementing new systems
Model SP90 11″ (27.9 cm) round stainless steel with No. 2L bright finish on exterior. Includes the rubber seat washer.
SP829SS AXION – AXION® MSR ShowerheadModel SP829SS AXION AXION® MSR 10-5/8″ (27 cm) stainless steel drench showerhead delivers dispersed flow for uniform drenching. This new hydrodynamic design minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Inlet 1″ NPT.
SP65SS – AXION MSR Eye/face Wash HeadModel SP65SS AXION MSR stainless steel eye/face wash inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drains. The eyewash streams provide a smooth, even laminar flow for enhanced comfort, stability and effectiveness. (Not for use with freeze protected models)
SP509SS – In-Line StainerModel SP509SS is a Type 304 stainless steel in-line 50 x 50 mesh water strainer that prevents debris from reaching the eye/face wash. Easily serviceable.
SP265 – Shower Ball ValveModel SP265 is a stay-open stainless steel ball shower valve with stainless steel stem for horizontal or vertical installation. Model includes handle. 1″ FIPS.
SP204 – Pull Rod 56″Model SP204 is a 56″ (142.2 cm) long stainless steel pull rod.
SP200 – Pull Rod 28″Model SP200 is a 28″ (71.1 cm) long stainless steel pull rod.
SP202 – Pull Rod 44″Model SP202 is a 44″ (111.8 cm) long stainless steel pull rod.
SP216 – Horizontal FlagModel SP216 is a push flag for eyewash valves.
SP218 – Push PlatesModel SP218 is a single motion large zinc plated steel push plate for freeze-resistant valves. Valve stays open until manually closed.
SP220SS – Foot TreadleModel SP220SS is a complete stainless steel foot control assembly, including chain, clamp, nut, ring, screw, spring and treadle. For use on pedestal and combination units.