The Haws® eye wash model 7778B AXION is the optimal solution for industrial applications where highest corrosion resistance is required. It complies to the standards EN 15154-2 and ANSI Z358.1. All components are made of stainless steel and makes this permanently installed eye wash extremely corrosion resistant and very rugged. The patented AXION® shower head delivers reliable a compliant water jet for rinsing simultaneously eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7778B AXION also includes a stainless steel wall bracket, yellow plastic pop-off dust cover for eye wash head and eye wash safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 381 x 470 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye wash 7778B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Corrosion resistant 28 cm type 304 stainless steel bowl
- Reliable stainless steel type 304 ball valve equipped with stainless steel ball and stem
- Stainless steel type 304 in-line mesh strainer to prevent debris
- Robust stainless steel type 304 wall bracket
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Haws 8905 AXION features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.
- Dust cover allows for the 8905 AXION to stay protected from debris when not in use
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- 12 foot (365.8 cm) yellow recoil hose provides an extended coverage area to further optimize the irrigation process
- In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8130 AXION – Corrosion Resistant Emergency Drench ShowerModel 8130 AXION AXION MSR drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reduced installation time due to pre-built valve assembly and units design to mount horizontally or vertically from any wall or ceiling
- Corrosion resistant Schedule 80 PVC pipe and stainless steel valve makes for a durable long lasting product
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8123 AXION – Emergency Drench ShowerModel 8123 AXION, horizontal or vertical drench shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this drench shower is designed for safety.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reduced installation time due to pre-built valve assembly and unit’s ability to be mounted horizontally or vertically from any wall or ceiling
- Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
- EN 15154 compliant
Haws model 8122 AXION AXION MSR drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Reduced installation time due to pre-built valve assembly and unit’s ability to mount horizontally or vertically from any wall or ceiling
- Solid construction from hot-dipped galvanized steel make for a durable long lasting product
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8133H AXION – Corrosion Resistant Emergency Drench ShowerModel 8133H AXION, horizontal overhead safety shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this horizontally designed drench shower is designed for safety.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reduced installation time due to pre-built valve assembly and unit’s ability to be mounted horizontally from any wall
- Solid construction from Type 304 Stainless Steel makes for a durable long lasting product
- Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
- EN 15154 compliant
Model 7260 AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Unit features a round 11″ (27.9 cm) green ABS plastic receptor and aluminum
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8122HWC AXION – Barrier-Free Emergency Drench ShowerHaws 8122HWC AXION AXION MSR barrier-free drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include a universal emergency sign and extended 56″ (142.2 cm) pull rod for wheelchair accessibility.
- A great addition to potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Reduced installation time due to pre-built valve assembly and units design to mount horizontally from any wall
- Solid construction from Schedule 40 hot-dipped galvanized steel make for a durable long lasting product
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8111FP AXION – Freeze Protected Drench ShowerModel 8111FP AXION AXION MSR freeze protected drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, this unit’s safety features include a universal emergency sign, and valve installation that protects unit from freezing.
- A great addition to multiple potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, valve assembly is pre-built
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7260B AXION – Wall mount eyewash – ABS bowlThe Haws® eyewash model 7260B AXION is the optimal solution for industrial applications. It complies to the standards EN 15154-2 and ANSI Z358.1. An ABS plastic bowl makes this permanently installed eye wash very durable. The patented AXION® shower head delivers reliable a compliant water jet for rinsing eyes and face. The unique, centered AXION water jet eliminates the main issues of other eye wash systems to provide proper first aid. Model 7260B also includes a chromate-protected cast aluminum wall bracket, yellow plastic pop-off dust cover for eye wash head and universal safety sign.
Technical information
- Water flow: 14 liters/minute
- Application: indoor/outdoor
- Dimensions (H x W x D): 300 x 371 x 359 mm
- Water inlet: G 1/2″
- Water outlet: G 1″
Characteristics Eye Wash 7260B AXION
- Pre-built and fully water/pressure tested
- Increased safety due to AXION face+eyewash head and integral flow control
- Alkalis resistant 28 cm green ABS plastic bowl
- Reliable chrome-plated brass stay-open ball valve with stainless steel ball and stem
- Chrome-plated brass in-line mesh strainer to prevent debris
- Including universal safety sign
- Wide range of options for adapting to on-site requirements
Haws emergency eyewash systems, like the freeze protected 7433FP AXION, use AXION head that activate with the push of a stainless steel flag. Head comes equipped with pop-off dust cover, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP AXION to be mounted in a number of easily accessible locations.
- A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
- Fully functional in freezing environments when installed properly
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
7460BT AXION – Wall Mount EyewashModel 7460BT AXION wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/2″ NPT
- ANSI/ISEA Z358.1 tempering solutions
- EN 15154 compliant
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.